https://community.hpe.com/t5/server-management-systems/sim-6-3-adding-servers/m-p/4794913#M43850 Is there a way in SIM 6.3 to manually add servers? I have been running an older version which had an option to manually add the same place you can setup auto-discovery but I do not see that now. Your help is much appreciated. Thanks! Thu, 02 Jun 2011 14:38:36 GMT EddieG_1 2011-06-02T14:38:36Z https://community.hpe.com/t5/server-management-systems/sim-6-3-adding-servers/m-p/4794913#M43850 Is there a way in SIM 6.3 to manually add servers? I have been running an older version which had an option to manually add the same place you can setup auto-discovery but I do not see that now. Your help is much appreciated. Thanks! Thu, 02 Jun 2011 14:38:36 GMT https://community.hpe.com/t5/server-management-systems/sim-6-3-adding-servers/m-p/4794913#M43850 EddieG_1 2011-06-02T14:38:36Z https://community.hpe.com/t5/server-management-systems/sim-6-3-adding-servers/m-p/4794914#M43851 From the command prompt c:&gt;MXNODE /?<BR /><BR />It will give you the options<BR /><BR />for adding, its -a Thu, 02 Jun 2011 23:21:09 GMT https://community.hpe.com/t5/server-management-systems/sim-6-3-adding-servers/m-p/4794914#M43851 Pete2010 2011-06-02T23:21:09Z https://community.hpe.com/t5/server-management-systems/sim-6-3-adding-servers/m-p/4794915#M43852 It is the same way like before... In the Menu you go to Options and then Discovery and there you can add multiple (but also only one) new address to be discovered...<BR />Uncheck the check box to not let it run by default every 24 hours... Fri, 03 Jun 2011 07:25:01 GMT https://community.hpe.com/t5/server-management-systems/sim-6-3-adding-servers/m-p/4794915#M43852 Bart_Heungens 2011-06-03T07:25:01Z