https://community.hpe.com/t5/server-management-systems/hp-sim-6-3-required-for-ilo3/m-p/4824277#M44045 <P>Yes, you need to have HP SIM 6.3 to support ILO3 as 6.2 doesnot support ILO3</P> Wed, 13 Jul 2011 10:26:43 GMT sidd411 2011-07-13T10:26:43Z https://community.hpe.com/t5/server-management-systems/hp-sim-6-3-required-for-ilo3/m-p/4802991#M43941 <P>Hi,</P><P>&nbsp;</P><P>A customer has a SIM 6.2 install which we did a few months ago. Now he has a couple of systems with ILO3, the issue we came upon now is that when clicking links like Remote Serial Console, Virtual Media, etc the browser ( both IE and Firefox) will try to open the ILO page but it ends up failing with in the address bar 2 times the IP of the ILO.</P><P>&nbsp;</P><P>So it shows: <A target="_blank" href="https://xxx.xxx.xxx.xxxhttps://xxx.xxx.xxx.xxx">https://xxx.xxx.xxx.xxxhttps://xxx.xxx.xxx.xxx</A></P><P>&nbsp;</P><P>So I contacted support and they tell me you need to have HP SIM 6.3 to support ILO3. Is this true? I thought SIM 6.0 and up supported ILO3 ?</P> Mon, 27 Jun 2011 09:09:38 GMT https://community.hpe.com/t5/server-management-systems/hp-sim-6-3-required-for-ilo3/m-p/4802991#M43941 Peter Windey 2011-06-27T09:09:38Z https://community.hpe.com/t5/server-management-systems/hp-sim-6-3-required-for-ilo3/m-p/4824277#M44045 <P>Yes, you need to have HP SIM 6.3 to support ILO3 as 6.2 doesnot support ILO3</P> Wed, 13 Jul 2011 10:26:43 GMT https://community.hpe.com/t5/server-management-systems/hp-sim-6-3-required-for-ilo3/m-p/4824277#M44045 sidd411 2011-07-13T10:26:43Z