https://community.hpe.com/t5/server-management-systems/hp-sim-amp-blade-enclosure/m-p/4885708#M44958 cheers m'dear Fri, 18 Feb 2005 03:43:33 GMT john_347 2005-02-18T03:43:33Z https://community.hpe.com/t5/server-management-systems/hp-sim-amp-blade-enclosure/m-p/4885706#M44956 Running HPSim 4.2 and have new blade enclosure running BL20p G3 with ESX 2.5. Have loaded new management module update 2.10 to enclosure &amp; have Insight clients on Hosting servers.<BR /><BR />Problem;- New enclosure,power supplies and blade servers do not show up properly with the exception of one blade which is displayed with correct information and is listed in enclosure. Have we missed something.. <BR /><BR />Grateful for any help Mon, 14 Feb 2005 11:49:22 GMT https://community.hpe.com/t5/server-management-systems/hp-sim-amp-blade-enclosure/m-p/4885706#M44956 john_347 2005-02-14T11:49:22Z https://community.hpe.com/t5/server-management-systems/hp-sim-amp-blade-enclosure/m-p/4885707#M44957 If you have discovered the Gbe2 switches, go into the systems list and delete them. There is a firmware update in the works for the switches that will correct a problem in the way they report themselves which breaks the associations in HP SIM. Mon, 14 Feb 2005 14:04:27 GMT https://community.hpe.com/t5/server-management-systems/hp-sim-amp-blade-enclosure/m-p/4885707#M44957 David Claypool 2005-02-14T14:04:27Z https://community.hpe.com/t5/server-management-systems/hp-sim-amp-blade-enclosure/m-p/4885708#M44958 cheers m'dear Fri, 18 Feb 2005 03:43:33 GMT https://community.hpe.com/t5/server-management-systems/hp-sim-amp-blade-enclosure/m-p/4885708#M44958 john_347 2005-02-18T03:43:33Z