https://community.hpe.com/t5/server-management-systems/cannot-discover-the-ms-cluster-server-on-sim-4-2/m-p/4892152#M45212 Hi All,<BR /> I have an ms cluster running on 2 Dl380G3 servers. I have installed the MS cluster with serverc1 and serverc2 with cluster name as server. When I do the manual discover, I can see all 3 servers serverc1, serverc2 and server. But SIM did not recognize that server is the cluster and did not show up in the systemlist\clusterbytype view. The only thin they mention in the user guide is Global protocol setting and I believed that I have setup them up properly.<BR /> Mon, 21 Mar 2005 13:22:41 GMT Aung Thu 2005-03-21T13:22:41Z https://community.hpe.com/t5/server-management-systems/cannot-discover-the-ms-cluster-server-on-sim-4-2/m-p/4892152#M45212 Hi All,<BR /> I have an ms cluster running on 2 Dl380G3 servers. I have installed the MS cluster with serverc1 and serverc2 with cluster name as server. When I do the manual discover, I can see all 3 servers serverc1, serverc2 and server. But SIM did not recognize that server is the cluster and did not show up in the systemlist\clusterbytype view. The only thin they mention in the user guide is Global protocol setting and I believed that I have setup them up properly.<BR /> Mon, 21 Mar 2005 13:22:41 GMT https://community.hpe.com/t5/server-management-systems/cannot-discover-the-ms-cluster-server-on-sim-4-2/m-p/4892152#M45212 Aung Thu 2005-03-21T13:22:41Z https://community.hpe.com/t5/server-management-systems/cannot-discover-the-ms-cluster-server-on-sim-4-2/m-p/4892153#M45213 You need to add the cluster information on the HP management Agent in the control pannel. After that I was able to discover that. Get the help from HP. Wed, 23 Mar 2005 11:25:14 GMT https://community.hpe.com/t5/server-management-systems/cannot-discover-the-ms-cluster-server-on-sim-4-2/m-p/4892153#M45213 Aung Thu 2005-03-23T11:25:14Z