topic missing system magment colum in Server Management - Systems Insight Manager

missing system magment colum

Bas van den Dikkenberg — Mon, 23 May 2005 06:24:51 GMT

I'm missing at one of my servers the System Management Pages.

I have on that server installed snmp + openssh
But don't get the System Management Pages why

At Management Protocols i only have SNMP:1.0

And at ther other servers i have these managemnet protocols:

Management Protocols HTTP:1.0, SMH:2.0, SNMP:1.0, SSH:SSH-2.0-OpenSSH_3.7.1p1

Re: missing system magment colum

Rob Buxton — Mon, 23 May 2005 15:34:56 GMT

Have you installed the HP SIM Agents on that Server?
What kind of Server is it?
It indicates either the Agents are not installed or they're not running. The Agents are Web Based, SNMP is required for the Server discovery and identification by HPSIM. OpenSSH is not involved at this point.

Re: missing system magment colum

Bas van den Dikkenberg — Mon, 23 May 2005 15:42:50 GMT

ML350 g4 running windows 2003

installed with smart start 7.30 en updated with support pack 7.40

al agents are running according to managment homepage

Re: missing system magment colum

Rob Buxton — Mon, 23 May 2005 18:49:58 GMT

Try rerunning the Identification Task for the Server. Then check the protocols discovered.

Try browsing to the Server directly, e.g. https://server:2381, first from the Server itself and then from the HPSIM Server.

Any firewalls possibly restricting the ports 2301 (http) or 2381 (https)?

Re: missing system magment colum

Rob Buxton — Mon, 23 May 2005 18:51:12 GMT

I'll also assume you installed 7.20A and went to 7.30A. I don't believe there's a 7.40 available as yet.

Re: missing system magment colum

Bas van den Dikkenberg — Thu, 26 May 2005 03:23:44 GMT

The problem was in the ip bindings that server was is in other subnet as defind in the security options of system mangement homepage.

Thanx voor al your help