topic Re: HPCIM4.1 - CMS Server showing SW (blue I) in Server Management - Systems Insight Manager

HPCIM4.1 - CMS Server showing SW (blue I)

Annette Jones_2 — Tue, 27 Jul 2004 09:17:32 GMT

The CMS doubles up as the VCRM, it will not allow the VCA install to complete on the same server, due to it being the VCRM. The SW status is not the usual green tick but blue information.

Any reason why?

Re: HPCIM4.1 - CMS Server showing SW (blue I)

Ivan KOVAC — Tue, 27 Jul 2004 10:35:07 GMT

Hello

If you move your cursor over the i it should display the reason. Probably is somthing with certificates.

I.

Re: HPCIM4.1 - CMS Server showing SW (blue I)

Annette Jones_2 — Tue, 27 Jul 2004 10:43:48 GMT

VCA Agent not found, is the reason, question is seeing as the server is a VCRM shoul dit have a VCA installed, if so how, cause I have tried.

Re: HPCIM4.1 - CMS Server showing SW (blue I)

Joel Rubenstein — Tue, 27 Jul 2004 13:52:27 GMT

The VCA should have been installed as part of the Proliant Support Pack. It is not a component of the SIM installation.

Re: HPCIM4.1 - CMS Server showing SW (blue I)

Rob Buxton — Tue, 27 Jul 2004 20:52:23 GMT

You can manually run the cpxxxxxx.exe packages on the Server to install components.

The VCA should be there, check the service is running.

Re: HPCIM4.1 - CMS Server showing SW (blue I)

Annette Jones_2 — Wed, 28 Jul 2004 03:04:12 GMT

guys,

The support pac, is there an equivilant to VCA for Netware 5.1. Can you confirm also if HPCIM 4.1 can remotely deploy updates to Netware 5.

Ta