https://community.hpe.com/t5/server-management-systems/auto-discovery/m-p/3343256#M4631 Using HPSIM4.1, is there any reason why auto discovery will not pick up certain devices. SNMP etc., is setup and a manual discovery works ok. I've noticed that two of the devices not discovered are DHCP, 1 is a server (W2K) the other a workstation (NT4).<BR /><BR />My worry is that to discover all Workstation it would be very time consuming if I had to complete a manual discovery, these will be setup for DHCP. Wed, 28 Jul 2004 08:20:35 GMT Annette Jones_2 2004-07-28T08:20:35Z https://community.hpe.com/t5/server-management-systems/auto-discovery/m-p/3343256#M4631 Using HPSIM4.1, is there any reason why auto discovery will not pick up certain devices. SNMP etc., is setup and a manual discovery works ok. I've noticed that two of the devices not discovered are DHCP, 1 is a server (W2K) the other a workstation (NT4).<BR /><BR />My worry is that to discover all Workstation it would be very time consuming if I had to complete a manual discovery, these will be setup for DHCP. Wed, 28 Jul 2004 08:20:35 GMT https://community.hpe.com/t5/server-management-systems/auto-discovery/m-p/3343256#M4631 Annette Jones_2 2004-07-28T08:20:35Z https://community.hpe.com/t5/server-management-systems/auto-discovery/m-p/3343257#M4632 HP SIM by default uses a discovery filter to limit the types of devices that are discovered. Go to Options--Discovery--Automatic Discovery and then click on the "discovery filter" link to modify the filter to meet your needs. Wed, 28 Jul 2004 09:15:06 GMT https://community.hpe.com/t5/server-management-systems/auto-discovery/m-p/3343257#M4632 Joel Rubenstein 2004-07-28T09:15:06Z