https://community.hpe.com/t5/server-management-systems/sim5-disk-thresholds-problem/m-p/4939489#M46492 Original problem was the SIM5 was set to force trust by certitificate ONLY, I REMOVED THIS and all works OK now, except for 3 with same setings as all the rest?? STRANGE! Thu, 10 Nov 2005 08:21:15 GMT Peter Fynney 2005-11-10T08:21:15Z https://community.hpe.com/t5/server-management-systems/sim5-disk-thresholds-problem/m-p/4939487#M46490 I have setup a Disk Thresholds Scheduled Task, when I do a run now on this task to 1 server with psp7.40 agents installed I get the error :<BR /><BR />Could not set the disk threshold, the agent did not accept the request. <BR /><BR />Any ideas? This happens on any individual server i select. Wed, 09 Nov 2005 08:16:23 GMT https://community.hpe.com/t5/server-management-systems/sim5-disk-thresholds-problem/m-p/4939487#M46490 Peter Fynney 2005-11-09T08:16:23Z https://community.hpe.com/t5/server-management-systems/sim5-disk-thresholds-problem/m-p/4939488#M46491 See new thread raised, I have 46 out of 49 now working OK.<BR /><BR />Original problem was the SIM5 was set to force trust by certitificate ONLY, I REMOVED THIS and all works OK now, except for 3 with same setings as all the rest?? STRANGE! Thu, 10 Nov 2005 07:43:57 GMT https://community.hpe.com/t5/server-management-systems/sim5-disk-thresholds-problem/m-p/4939488#M46491 Peter Fynney 2005-11-10T07:43:57Z https://community.hpe.com/t5/server-management-systems/sim5-disk-thresholds-problem/m-p/4939489#M46492 Original problem was the SIM5 was set to force trust by certitificate ONLY, I REMOVED THIS and all works OK now, except for 3 with same setings as all the rest?? STRANGE! Thu, 10 Nov 2005 08:21:15 GMT https://community.hpe.com/t5/server-management-systems/sim5-disk-thresholds-problem/m-p/4939489#M46492 Peter Fynney 2005-11-10T08:21:15Z