https://community.hpe.com/t5/server-management-systems/integrated-management-logs/m-p/3345825#M4688 You also need an SNMP community string on the box that is enabled for READ-WRITE. Fri, 30 Jul 2004 11:30:28 GMT David Claypool 2004-07-30T11:30:28Z https://community.hpe.com/t5/server-management-systems/integrated-management-logs/m-p/3345824#M4687 I am running SIM 4.1 and have a couple of servers that show up with a failed status on the Integrated Management Log. I know this is because of the errors that are in the log. I would like to mark these errors as repaired but I don't get the option to change the value. The bottom of the log says<BR /><BR />"The ability to modify the Integrated Management Log maybe disabled because you are not logged in with administrator privileges or because SNMP sets are disabled." <BR /><BR />I have verified that SNMP sets are enabled and when I logged into the system management homepage I logged in as administrator. What do I need to do to fix this so I can modify these logs?<BR /><BR />Thanks. Fri, 30 Jul 2004 11:20:07 GMT https://community.hpe.com/t5/server-management-systems/integrated-management-logs/m-p/3345824#M4687 Nancy Kafer 2004-07-30T11:20:07Z https://community.hpe.com/t5/server-management-systems/integrated-management-logs/m-p/3345825#M4688 You also need an SNMP community string on the box that is enabled for READ-WRITE. Fri, 30 Jul 2004 11:30:28 GMT https://community.hpe.com/t5/server-management-systems/integrated-management-logs/m-p/3345825#M4688 David Claypool 2004-07-30T11:30:28Z