topic Re: Automatic Event Messages from SIM 5.0 in Server Management - Systems Insight Manager

Automatic Event Messages from SIM 5.0

William Benner — Thu, 13 Apr 2006 15:55:47 GMT

I'm receiveing messages when a server is not reachable during a re-boot but I never receive a message when the system is back up. How do I get it to send a message when the system is reachable.

Re: Automatic Event Messages from SIM 5.0

Derek_56 — Fri, 14 Apr 2006 07:58:02 GMT

William,

You can configure this in the same place as the unreachable events. In SIM go to:
- Options
- Events
- Status Change Event Settings

Make sure the checkbox for "Enable creation of system status change events" is checked. If you want the events to automatically clear, check the box below that for "Automatically clear unreachable system status change events when system is reachable."
Past that, you would also need to create an event handler to message/page you when the "System is reachable" just like the one set when it's not reachable.

Re: Automatic Event Messages from SIM 5.0

William Benner — Fri, 14 Apr 2006 14:11:46 GMT

Derek:
Thanks, that did it!

Re: Automatic Event Messages from SIM 5.0

William Benner — Fri, 14 Apr 2006 14:12:24 GMT