topic Software status reported inacurately in Server Management - Systems Insight Manager

Software status reported inacurately

Gary Head — Tue, 30 May 2006 08:40:17 GMT

Hi
I have a server that is showing a major alert under the software warning. I have checked this on the local servers agent interface and all is fine with a full set of green ticks. I have tried polling the software status to no avail.
I am aware of the method of removing and discovering again but when you have 200 servers and you configure SIM to suit, you do not want to do that every time a status changes. Also this problem first arose in SIM4.1 and is still a problem in SIM5.4.

Thanks Gary

Re: Software status reported inacurately

jim goodman — Wed, 31 May 2006 11:16:21 GMT

Gary make sure that the check box underneath of the Reference Support Pack in the VCA settings it is unchecked.

This will display a major status if the Reference Support Pack and what is installed on the system don't exactly match.

- Jim

Re: Software status reported inacurately

Rob Buxton — Thu, 01 Jun 2006 03:25:00 GMT

It will also show a Major alert if the Software Polling task has not been able to access the agent.
Can you click on the SW Icon and go directly to the VCA Page from the HPSIM screen?

Re: Software status reported inacurately

Gary Head — Thu, 01 Jun 2006 03:34:38 GMT

Hi
Thanks for your replies. It has actually changed it's status today. I believe there may be an issue with the global protocol settings in SIM 5.4 as I have found that when the SNMP comunity strings are placed in the global default settings and then aplied to the agents as a global setting they seem to be ignored, however when I change the setting on an individual server to use the SNMP settings specified in the manual imput box they are applied succesfully.

Many thanks Gary