https://community.hpe.com/t5/server-management-systems/hp-nnm-7-0-and-sim/m-p/3347074#M4762 That's the only gotcha? Then I should be good to go. Thanks, Mon, 02 Aug 2004 10:38:50 GMT Tom Kline 2004-08-02T10:38:50Z https://community.hpe.com/t5/server-management-systems/hp-nnm-7-0-and-sim/m-p/3347072#M4760 I can't seem to verify if SIM will work with NNM 7.0. The docs I read mention NNM 6.4, but nothing about 7.0. Does anyone know?<BR />Thanks,<BR />Tom Mon, 02 Aug 2004 10:15:48 GMT https://community.hpe.com/t5/server-management-systems/hp-nnm-7-0-and-sim/m-p/3347072#M4760 Tom Kline 2004-08-02T10:15:48Z https://community.hpe.com/t5/server-management-systems/hp-nnm-7-0-and-sim/m-p/3347073#M4761 If you install NNM 7 and SIM 4.1 on the same system this will cause a problem with the Insight Agents SNMP communications.<BR /><BR />Please see the following customer advisory for a configuration workaround.<BR /><BR /><A href="http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=PSD_ES040405_CW02" target="_blank">http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=PSD_ES040405_CW02</A><BR /> Mon, 02 Aug 2004 10:25:54 GMT https://community.hpe.com/t5/server-management-systems/hp-nnm-7-0-and-sim/m-p/3347073#M4761 Joel Rubenstein 2004-08-02T10:25:54Z https://community.hpe.com/t5/server-management-systems/hp-nnm-7-0-and-sim/m-p/3347074#M4762 That's the only gotcha? Then I should be good to go. Thanks, Mon, 02 Aug 2004 10:38:50 GMT https://community.hpe.com/t5/server-management-systems/hp-nnm-7-0-and-sim/m-p/3347074#M4762 Tom Kline 2004-08-02T10:38:50Z https://community.hpe.com/t5/server-management-systems/hp-nnm-7-0-and-sim/m-p/3347075#M4763 The current integration will work with 7.0 but only uses traditional maps, not the new dynamic maps. Mon, 02 Aug 2004 10:47:08 GMT https://community.hpe.com/t5/server-management-systems/hp-nnm-7-0-and-sim/m-p/3347075#M4763 David Claypool 2004-08-02T10:47:08Z