topic Re: Raid configuration in the data collection in Server Management - Systems Insight Manager

Raid configuration in the data collection

OlivierV — Wed, 27 Sep 2006 09:32:09 GMT

Hello.

I don't see the raid configuration in the data collection reports. I have the SMartcard type, the drive types but I can't see how the raid is/are configured like Raid 1 with 2 x 72 Gb..

Can I get this information from the data connector or only with the HP agents ?

Thank you.

Re: Raid configuration in the data collection

sandeep_raman — Wed, 27 Sep 2006 13:21:11 GMT

Hello OlivierV,

Afaik, data collection report would'nt give you raid level information.
Information that i have seen:

Array controller family
Firmware
Slot
Logicsal disk size
Physical disks

The best bet is to check ACU.

SRH

Re: Raid configuration in the data collection

OlivierV — Thu, 28 Sep 2006 01:37:01 GMT

Yes, this is what I have seen too.

Re: Raid configuration in the data collection

OlivierV — Wed, 04 Oct 2006 10:11:50 GMT

Well, it seems the raid configuration can't be collected