software server status incorrect, hp sim 5.1 sp1

Rogier Boeken — Mon, 21 May 2007 04:56:28 GMT

hi
i moved on from hp sim 4.2 to a new hp sim server and installed 5.1 sp1 and everything is working much better now (lots of problems with pmp etc on 4.2)

anyway, i do have a small issue with the software server status

i updated to psp 7.8 and also updated all the individual firmware, driver updates but 3 items cannot be updated. i get following error message

The software will not be installed on this system because the required hardware is not present in the system or the software/firmware doesn't apply to this system.

how can i remove those 3 hardware items from the list of this server so the software status is showing as fully updated.

the 3 items are:
HP ProLiant Smart Array SAS/SATA Controller Driver for Windows Server 2003
HP ProLiant CSB-6 ATA-100 IDE RAID Driver for Windows 2000/Windows Server 2003
HP ProLiant 64-Bit/133-MHz Single/Dual Channel Ultra320 SCSI HBA and SCxxXe series SCSI HBA Driver for Windows Server 2003

see attached screenshot for overall status

many thanks
butre

Re: software server status incorrect, hp sim 5.1 sp1

Rancher — Mon, 21 May 2007 08:16:32 GMT

Please see the following thread:

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1127033

Re: software server status incorrect, hp sim 5.1 sp1

Rogier Boeken — Tue, 22 May 2007 04:09:27 GMT

i realised shortly after posting my message there was another thread, apologies, (i did search the forum but obviously used the wrong search string)

topic Re: software server status incorrect, hp sim 5.1 sp1 in Server Management - Systems Insight Manager

software server status incorrect, hp sim 5.1 sp1

Re: software server status incorrect, hp sim 5.1 sp1

Re: software server status incorrect, hp sim 5.1 sp1