https://community.hpe.com/t5/server-management-systems/vca-errors/m-p/3350625#M4930 Specific errors are "Not enough storage to process this command" even though I have between 3 35 gig avaiable on the drive/s Also "Cannot connect to server" but I can ping it as well as do an nslookup to the vcrm from it. I also have 2500 servers in the database and this is occuring around the globe. Thu, 05 Aug 2004 13:49:46 GMT Ken Slaton_2 2004-08-05T13:49:46Z https://community.hpe.com/t5/server-management-systems/vca-errors/m-p/3350623#M4928 Why do systems on the same subnet recieve different errors when trying to configure the VCA? I am getting these errors from all over the world since deploying SIM 4. Thu, 05 Aug 2004 12:52:20 GMT https://community.hpe.com/t5/server-management-systems/vca-errors/m-p/3350623#M4928 Ken Slaton_2 2004-08-05T12:52:20Z https://community.hpe.com/t5/server-management-systems/vca-errors/m-p/3350624#M4929 can you be more specific? Thu, 05 Aug 2004 13:27:02 GMT https://community.hpe.com/t5/server-management-systems/vca-errors/m-p/3350624#M4929 David Claypool 2004-08-05T13:27:02Z https://community.hpe.com/t5/server-management-systems/vca-errors/m-p/3350625#M4930 Specific errors are "Not enough storage to process this command" even though I have between 3 35 gig avaiable on the drive/s Also "Cannot connect to server" but I can ping it as well as do an nslookup to the vcrm from it. I also have 2500 servers in the database and this is occuring around the globe. Thu, 05 Aug 2004 13:49:46 GMT https://community.hpe.com/t5/server-management-systems/vca-errors/m-p/3350625#M4930 Ken Slaton_2 2004-08-05T13:49:46Z