https://community.hpe.com/t5/server-management-systems/sim-version-control-inventory/m-p/5072623#M49440 I updated the ILO2 firmware to 1.35 but the VC inventory (installed software) says it is still at 1.26 .. I need to get the "installed software" to reflect that the ILO2 is 1.35. <BR /><BR />I did run HP Insight Diags to make sure it was seen as 1.35 and it was. Thu, 04 Oct 2007 13:16:31 GMT Bruce Rose 2007-10-04T13:16:31Z https://community.hpe.com/t5/server-management-systems/sim-version-control-inventory/m-p/5072623#M49440 I updated the ILO2 firmware to 1.35 but the VC inventory (installed software) says it is still at 1.26 .. I need to get the "installed software" to reflect that the ILO2 is 1.35. <BR /><BR />I did run HP Insight Diags to make sure it was seen as 1.35 and it was. Thu, 04 Oct 2007 13:16:31 GMT https://community.hpe.com/t5/server-management-systems/sim-version-control-inventory/m-p/5072623#M49440 Bruce Rose 2007-10-04T13:16:31Z https://community.hpe.com/t5/server-management-systems/sim-version-control-inventory/m-p/5072624#M49441 Had to move Remote Insight Information to teh Active Agents ... once that was done and the agents were restarted all was well. Thu, 04 Oct 2007 13:38:39 GMT https://community.hpe.com/t5/server-management-systems/sim-version-control-inventory/m-p/5072624#M49441 Bruce Rose 2007-10-04T13:38:39Z