topic Re: SIM will not indentify rack, enclosures, blades in Server Management - Systems Insight Manager

SIM will not indentify rack, enclosures, blades

Sean Murray_1 — Mon, 10 Dec 2007 16:45:30 GMT

Using version 3.1 of the Bladesystem Management plugin and SIM 5.1.

When I add an OA it does not identify anything. Does not even show up as one itself, but has the correct info on it's properties page.

I had the box checked to discover systems in an enclosure when the OA is discovered.

Anyone have any suggestions why this will not work right? I have added and removed from SIM so many times at this point.

Thanks

Re: SIM will not indentify rack, enclosures, blades

fishmn — Mon, 10 Dec 2007 21:08:32 GMT

SNMP is setup properly on the OA to talk to SIM? I have no problem with my c7000 enclosures showing up as long as they can talk SNMP.

Re: SIM will not indentify rack, enclosures, blades

Sean Murray_1 — Mon, 10 Dec 2007 21:29:10 GMT

The problem was someone entering an invalid character '&' under a section on the OA.

That stopped all the info from being gathered.