https://community.hpe.com/t5/server-management-systems/threshholds/m-p/5094365#M49972 nm i figured it out, was the community string being read only, needs to be read/write. carry on. :) Mon, 25 Feb 2008 18:36:32 GMT CCyre 2008-02-25T18:36:32Z https://community.hpe.com/t5/server-management-systems/threshholds/m-p/5094364#M49971 I go to tasks and I see file system space used and set threshholds on each drive, click save and it doesn't save it reverts back to disabled (under 5%). Some permissions or something need to be set somewhere?<BR /><BR />Also can the same choice be set on all servers with 1 change instead of changing all servers individually? IE Alert when C drive is at 90% used, E drive 95% used on all servers. <BR /><BR />Thanks Mon, 25 Feb 2008 17:50:20 GMT https://community.hpe.com/t5/server-management-systems/threshholds/m-p/5094364#M49971 CCyre 2008-02-25T17:50:20Z https://community.hpe.com/t5/server-management-systems/threshholds/m-p/5094365#M49972 nm i figured it out, was the community string being read only, needs to be read/write. carry on. :) Mon, 25 Feb 2008 18:36:32 GMT https://community.hpe.com/t5/server-management-systems/threshholds/m-p/5094365#M49972 CCyre 2008-02-25T18:36:32Z https://community.hpe.com/t5/server-management-systems/threshholds/m-p/5094366#M49973 . Mon, 25 Feb 2008 18:37:08 GMT https://community.hpe.com/t5/server-management-systems/threshholds/m-p/5094366#M49973 CCyre 2008-02-25T18:37:08Z