https://community.hpe.com/t5/server-management-systems/riloe-ii-not-identified-by-sim-4-1-after-firmware-upgrade/m-p/3352580#M5001 I applied HP Support Pack 7.10 to 30 servers. I installed all support pack updates except for the RILOE II firmware. Once I verified that Support Pack installed successfully on all servers, I installed the RILOE II firmware upgrade (version 1.13). Now, SIM 4.1 shows a question mark in the MP column for 18 of the 30 servers. I have tried deleting and re-discovering the devices and I ran device identification multiple times. It appears that SIM can discover the RILOE II devices, but device Identification is not successful. Functionality of the RILOE II cards is fine, and I confirmed that the firmware was upgraded to 1.13 successfully. All of the RILOE II devices were identified correctly by SIM prior to the RILOE II firmware upgrade. Little help? Mon, 09 Aug 2004 09:47:07 GMT Rick Loevenstein 2004-08-09T09:47:07Z https://community.hpe.com/t5/server-management-systems/riloe-ii-not-identified-by-sim-4-1-after-firmware-upgrade/m-p/3352580#M5001 I applied HP Support Pack 7.10 to 30 servers. I installed all support pack updates except for the RILOE II firmware. Once I verified that Support Pack installed successfully on all servers, I installed the RILOE II firmware upgrade (version 1.13). Now, SIM 4.1 shows a question mark in the MP column for 18 of the 30 servers. I have tried deleting and re-discovering the devices and I ran device identification multiple times. It appears that SIM can discover the RILOE II devices, but device Identification is not successful. Functionality of the RILOE II cards is fine, and I confirmed that the firmware was upgraded to 1.13 successfully. All of the RILOE II devices were identified correctly by SIM prior to the RILOE II firmware upgrade. Little help? Mon, 09 Aug 2004 09:47:07 GMT https://community.hpe.com/t5/server-management-systems/riloe-ii-not-identified-by-sim-4-1-after-firmware-upgrade/m-p/3352580#M5001 Rick Loevenstein 2004-08-09T09:47:07Z https://community.hpe.com/t5/server-management-systems/riloe-ii-not-identified-by-sim-4-1-after-firmware-upgrade/m-p/3352581#M5002 I have this same problem based on the same changes. Upgraded Support Pack to 7.10. Then flashed the RILOE II firmware to 1.13. Question Mark in MP column. Any ideas? Thu, 21 Oct 2004 14:26:53 GMT https://community.hpe.com/t5/server-management-systems/riloe-ii-not-identified-by-sim-4-1-after-firmware-upgrade/m-p/3352581#M5002 Jeff Hanchey 2004-10-21T14:26:53Z https://community.hpe.com/t5/server-management-systems/riloe-ii-not-identified-by-sim-4-1-after-firmware-upgrade/m-p/3352582#M5003 Same problem. Updated some novell servers to psp710, after that i upgraded the riloeII to firmware 1.13. Sim41 recognizes both the server and riloe, but it doesn't see that they are linked together. Cpqri.nlm is loaded at the console. Tue, 26 Oct 2004 08:09:44 GMT https://community.hpe.com/t5/server-management-systems/riloe-ii-not-identified-by-sim-4-1-after-firmware-upgrade/m-p/3352582#M5003 Dennis vdH 2004-10-26T08:09:44Z