https://community.hpe.com/t5/server-management-systems/se6-crashes-sim/m-p/5107330#M50223 Hi,<BR /><BR />I have installed SE 6 over SIM 5.1. When I open SIM, it quite happily sits there without any problems...... until I open anything to do with SE6. When the SE window opens, it behaves as it should for about 10 seconds then it closes both the SE and the SIM window returning to the SIM login page. <BR /><BR />Has anyone experienced this before and if so, do you know a fix to it? <BR /><BR />Thank you Tue, 06 May 2008 14:06:50 GMT SE6 crashes SIM 2008-05-06T14:06:50Z https://community.hpe.com/t5/server-management-systems/se6-crashes-sim/m-p/5107330#M50223 Hi,<BR /><BR />I have installed SE 6 over SIM 5.1. When I open SIM, it quite happily sits there without any problems...... until I open anything to do with SE6. When the SE window opens, it behaves as it should for about 10 seconds then it closes both the SE and the SIM window returning to the SIM login page. <BR /><BR />Has anyone experienced this before and if so, do you know a fix to it? <BR /><BR />Thank you Tue, 06 May 2008 14:06:50 GMT https://community.hpe.com/t5/server-management-systems/se6-crashes-sim/m-p/5107330#M50223 SE6 crashes SIM 2008-05-06T14:06:50Z https://community.hpe.com/t5/server-management-systems/se6-crashes-sim/m-p/5107331#M50224 This problem is caused by not opening HPSIM with a FQDN. Thu, 08 May 2008 13:09:06 GMT https://community.hpe.com/t5/server-management-systems/se6-crashes-sim/m-p/5107331#M50224 SE6 crashes SIM 2008-05-08T13:09:06Z