topic Re: HP SIM detected power supply failure but not send out email alert in Server Management - Systems Insight Manager

HP SIM detected power supply failure but not send out email alert

ehuang — Fri, 18 Jul 2008 16:19:25 GMT

I have HP SIM installed and it does detect my two ESX hosts. However, when I unplugged one power supply, so there is NO power redundancy on one host, HP SIM see it as an "important" event, but doesn't send me email alerts. I got email alerts if the host is totally down. I have set up "automatic event handling" to "all events". Could somebody help?

Re: HP SIM detected power supply failure but not send out email alert

Rob Buxton — Sun, 20 Jul 2008 19:18:33 GMT

You'll need to check that the trapsend option in the /etc/snmp/snmpd.conf file, see extract below;

trapcommunity myROCommunity
trapsink 10.10.10.10 myROCommunity

Outage events are generated from HPSIM polling and not from snmp traps sent by the HP Agents on the ESX Host when they detect an error.
The other thing to ask is - do you have the HP Agents installed on the ESX Host? Check you've got the latest version 8.0.0a agents.

Re: HP SIM detected power supply failure but not send out email alert

ehuang — Mon, 21 Jul 2008 12:47:47 GMT

Thanks Rob. Yes, I have HP Agents (8.0.0a) installed on my ESX host, HP SIM does see it. I will play with the SNMP file and let you know what I could get.

Re: HP SIM detected power supply failure but not send out email alert

ehuang — Mon, 21 Jul 2008 15:03:56 GMT

Okay, Rob. Here is my problem:
I unplugged one powersupply on one host, HP SIM did see the degration, logged it as an "Important Events". However, it didn't send me an email as an alert. It does send emails for other monitored systems' events. What do you think?

Re: HP SIM detected power supply failure but not send out email alert

Rob Buxton — Mon, 21 Jul 2008 19:07:30 GMT

At a guess you're picking up major and critical events only for e-mail. An "important" event would slip below that.

If events are turning up in HPSIM, you know the ESX side is working okay.

Re: HP SIM detected power supply failure but not send out email alert

ehuang — Mon, 21 Jul 2008 19:12:44 GMT

Rob, I even tried specifying "major" and "critical" events as the triggers, no luck. I was with HP on the phone for the whole morning, one tech from HP SIM and one tech from ESX team, they could not figure out. I was told by the HP SIM tech that my hardware was not tested by HP, which I found it unbelievable. My host is DL360 G5. She said HP only supports ESX3.0 on that hardware. I am speechless.

Re: HP SIM detected power supply failure but not send out email alert

ehuang — Mon, 21 Jul 2008 19:14:33 GMT

The most weird thing is: HP SIM see the degration, but just not sending me alerts thru email. So close to get it there!!!

Re: HP SIM detected power supply failure but not send out email alert

ehuang — Mon, 21 Jul 2008 19:37:59 GMT

After pulling hair off my head and banging my head to the wall.... I played with snmpd.conf quite a while and got it work, eventually!!! I could go back to HP and tell that tech support HOW.

Re: HP SIM detected power supply failure but not send out email alert

Baktha — Sun, 30 Nov 2008 10:20:29 GMT

Hi
Same problem i am facing .Can you explain me the work around for this, pls.

Re: HP SIM detected power supply failure but not send out email alert

Dmitriy V. Poluektov — Thu, 29 Apr 2010 08:36:40 GMT

Hi ehuang,
please, tell me, how you has played with snpd.conf for geting email notify?

my conf:
get-community-name: public IP: 192.168.2.26
get-community-name: nkdmz IP: 192.168.2.26
trap-dest: 192.168.2.26

Thanks a lot!

Re: HP SIM detected power supply failure but not send out email alert

ehuang — Fri, 30 Apr 2010 16:31:24 GMT

this is mine:

dlmod cmaX /usr/lib/libcmaX.so
rwcommunity public 127.0.0.1
rocommunity public localhost
rwcommunity public 192.168.14.19
rocommunity summer
trapcommunity public
trapsink localhost
trapsink 192.168.14.19
syscontact root@localhost (edit snmpd.conf)
syslocation room1 (edit snmpd.conf)
dlmod SNMPESX /usr/lib/vmware/snmp/libSNMPESX.so