topic Re: EVA 4100 X HP SIM 5.2 in Server Management - Systems Insight Manager

EVA 4100 X HP SIM 5.2

Rafael Reimer — Thu, 18 Dec 2008 18:24:18 GMT

Hi all,
does anybody knows what I have to configure to make HP SIM recognizes EVA ? Command View 6.0 is installed in a DELL machine.

Thanks.

Re: EVA 4100 X HP SIM 5.2

marsh_1 — Thu, 18 Dec 2008 18:46:47 GMT

rafael,

this might help , there's a section on event management :-

http://h20000.www2.hp.com/bc/docs/support/SupportManual/c01375124/c01375124.pdf

good luck

Re: EVA 4100 X HP SIM 5.2

Rafael Reimer — Thu, 18 Dec 2008 19:00:58 GMT

Thanks for your help, but what I want to do is to make HP SIM recognize EVA when I add the CV host at the system.
I already did that configurations to make CV sends traps do HP SIM.

Re: EVA 4100 X HP SIM 5.2

David Claypool — Thu, 18 Dec 2008 21:49:27 GMT

Command View is an SMI-S provider, which is the storage form of WBEM. You need to supply WBEM credentials for HP SIM for an account that has privileges for Command View.

Re: EVA 4100 X HP SIM 5.2

Rob Buxton — Fri, 19 Dec 2008 00:31:43 GMT

HPSIM discovers the EVA via the SMIS-S component that should have been installed along with CV. So you need to have credentials entered into the WBEM section for the server that hosts CV.

I think these credentials should also belong to the Storage Group created by CV on the server.

Google wbemdisco as thats a good test tool.

Also CV6 is getting quite old now, you may want to look at upgrading that.

Re: EVA 4100 X HP SIM 5.2

Rafael Reimer — Sat, 21 Feb 2009 11:57:25 GMT

Thanks a lot for your help. Now it is working.