topic Re: Query with SNMP + Arcserve traps in Server Management - Systems Insight Manager

Query with SNMP + Arcserve traps

James Ridout — Tue, 17 Aug 2004 03:12:01 GMT

Hi all, I have setup an Event to send an email to myself when one of our servers fails to backup. However I'm not getting any emails nor is it showing the failed status in the system home page. I'm not sure if I've configured SNMP correctly.

I have set Hardware Polling for every hour but not sure if SIM is updating.

Servers are on a WAN.

Thanks.

James

Re: Query with SNMP + Arcserve traps

Alan Doran — Wed, 18 Aug 2004 04:28:52 GMT

James,

Have you set the SNMP properties on the server where ARCserve is running to send traps to your server running HP SIM?

Rgds
Alan.

Re: Query with SNMP + Arcserve traps

CA1499584 — Wed, 18 Aug 2004 11:54:56 GMT

James:

I use to have same problem,

1. Setup SYM to receive informational messages.
2. Send a test trap using Arcserve Alert managaer.

If trap shows up as uknown or unreconised trap. This means that you need to appl. a patch they made a month back .

Are you running Arcserve 2000 or EB 10.05?

Re: Query with SNMP + Arcserve traps

James Ridout — Mon, 16 Sep 2024 09:22:49 GMT

Hi, thanks for the replies.

Its Arcserve 2000+9 plus a few servers with 11.

I have set PUBLIC as read only on the servers and setup the trap to send to my SIM server but I don't get test trap.

Re: Query with SNMP + Arcserve traps

James Ridout — Thu, 19 Aug 2004 04:27:41 GMT

Hi, how do I setup SYM to receive informational messages ??

Thanks

James

Re: Query with SNMP + Arcserve traps

CA1499584 — Thu, 19 Aug 2004 08:37:44 GMT

On Main Window

Go to :
Options
Event
Event Filter Settings

Select Informational.

Remember that the server needs to be already added to SYM to receive the trap.