https://community.hpe.com/t5/server-management-systems/what-causes-the-system-type-to-show-quot-unmanaged-quot/m-p/3361413#M5349 It does mean that HPSIM has not been able to get any recognizable response from any of the protocols it tests.<BR /><BR />If you've made changes, rerun the Identification task for that Server.<BR /><BR />Note, SNMP Community names are case sensitive, and if this is a W2003 Server the default SNMP setting is to only accept SNMP requests from selected hosts, unlike W2000 which was allow all. Thu, 19 Aug 2004 17:32:16 GMT Rob Buxton 2004-08-19T17:32:16Z https://community.hpe.com/t5/server-management-systems/what-causes-the-system-type-to-show-quot-unmanaged-quot/m-p/3361412#M5348 If the server has current agents and the SNMP strings are correct as well as SNMP permitted managers, what would cause this? Thu, 19 Aug 2004 15:07:08 GMT https://community.hpe.com/t5/server-management-systems/what-causes-the-system-type-to-show-quot-unmanaged-quot/m-p/3361412#M5348 Mark Liedtke 2004-08-19T15:07:08Z https://community.hpe.com/t5/server-management-systems/what-causes-the-system-type-to-show-quot-unmanaged-quot/m-p/3361413#M5349 It does mean that HPSIM has not been able to get any recognizable response from any of the protocols it tests.<BR /><BR />If you've made changes, rerun the Identification task for that Server.<BR /><BR />Note, SNMP Community names are case sensitive, and if this is a W2003 Server the default SNMP setting is to only accept SNMP requests from selected hosts, unlike W2000 which was allow all. Thu, 19 Aug 2004 17:32:16 GMT https://community.hpe.com/t5/server-management-systems/what-causes-the-system-type-to-show-quot-unmanaged-quot/m-p/3361413#M5349 Rob Buxton 2004-08-19T17:32:16Z