https://community.hpe.com/t5/server-management-systems/creating-a-new-system-type/m-p/3362161#M5391 I use the "Retrieve From System" Button and enter the IP Address of the device I'm interested in.<BR />So, I might just select part of the text in the Object Value and change the Matching criteria.<BR /><BR />The MIB you've loaded will primarily be used for decoding any SNMP Traps, while the RFC MIB should be used for the device identification. Sun, 22 Aug 2004 17:04:37 GMT Rob Buxton 2004-08-22T17:04:37Z https://community.hpe.com/t5/server-management-systems/creating-a-new-system-type/m-p/3362160#M5390 I am trying to create a new system type from a MIB that I installed. When I get to the "MIB variable object identifier" option, shoud I choose the standard "rfc1213.mib" and "sysDescr"? I've tried to change it to the new MIB but I don't know what to choose for the MIB variable name and it then won't retrive the "Object value" from the system. I've read through the documentation on adding new MIBs but nothing says to what to do at this point. Fri, 20 Aug 2004 13:12:23 GMT https://community.hpe.com/t5/server-management-systems/creating-a-new-system-type/m-p/3362160#M5390 Kevin Everts_1 2004-08-20T13:12:23Z https://community.hpe.com/t5/server-management-systems/creating-a-new-system-type/m-p/3362161#M5391 I use the "Retrieve From System" Button and enter the IP Address of the device I'm interested in.<BR />So, I might just select part of the text in the Object Value and change the Matching criteria.<BR /><BR />The MIB you've loaded will primarily be used for decoding any SNMP Traps, while the RFC MIB should be used for the device identification. Sun, 22 Aug 2004 17:04:37 GMT https://community.hpe.com/t5/server-management-systems/creating-a-new-system-type/m-p/3362161#M5391 Rob Buxton 2004-08-22T17:04:37Z