https://community.hpe.com/t5/server-management-systems/issue-with-ilo3-sso/m-p/5729045#M54161 <P>Having an issue on our ESX hosts when we set the Management Processor to "Trust by Certificate" it does not allow SSO after it says it is successful and when&nbsp;I login into iLO an check the HP SIM SSO it shows the certificate. On our windows systems it seems to work fine. The iLO firmware is 1.28 (the latest one I can find). Anyone have an idea how to resolve this issue?</P> Wed, 18 Jul 2012 15:04:36 GMT Ryan256 2012-07-18T15:04:36Z https://community.hpe.com/t5/server-management-systems/issue-with-ilo3-sso/m-p/5729045#M54161 <P>Having an issue on our ESX hosts when we set the Management Processor to "Trust by Certificate" it does not allow SSO after it says it is successful and when&nbsp;I login into iLO an check the HP SIM SSO it shows the certificate. On our windows systems it seems to work fine. The iLO firmware is 1.28 (the latest one I can find). Anyone have an idea how to resolve this issue?</P> Wed, 18 Jul 2012 15:04:36 GMT https://community.hpe.com/t5/server-management-systems/issue-with-ilo3-sso/m-p/5729045#M54161 Ryan256 2012-07-18T15:04:36Z https://community.hpe.com/t5/server-management-systems/issue-with-ilo3-sso/m-p/5729135#M54162 Well, I was able to figure it out. Our blades only had the Standard iLO license. Changed them to an Advanced license and it worked like a charm when you rerun Trust by Cert. Wed, 18 Jul 2012 15:57:41 GMT https://community.hpe.com/t5/server-management-systems/issue-with-ilo3-sso/m-p/5729135#M54162 Ryan256 2012-07-18T15:57:41Z