topic Re: Management Processor embedded & ilo Failed in Server Management - Systems Insight Manager

Management Processor embedded & ilo Failed

Dave Claypole — Wed, 05 Oct 2005 06:10:16 GMT

Hi all

Can anyone explain why some of my management processors Embedded Nics & Intergrated Lights Out show as failed and some dont.

I have a number of DL360 G4, using PSP7.30. We dont actually use the ilo's on these servers (ie not plugged in) usually and on some servers these show up as OK on the System Insight Manager Home Page.

However on a few of the servers they show up as failure. The only way to clear this is to disable the ilo feature. This is not impossible but reguires a site visit to plug the ilo in and get the login details.

Is there anyother way ? and why some servers and not others ?

Thanks

Re: Management Processor embedded & ilo Failed

Justin Mattey_1 — Wed, 26 Oct 2005 09:43:47 GMT

Dave,

If you still have this problem here is a fix
I have a similar setup to you. i.e. I dont use the ilo's.
Goto - Control Panel - HP Management Agents on your servers with the problem. Under the services tab click on "Remote Insight Information" then "Remove" then "OK". Then it will prompt you to restart Management agents. When they are restarted, all is ok.
And if says your nics are failed (I take it they are not in use, just right click on the network connection in contol panel and "disable". Hope this helps

Re: Management Processor embedded & ilo Failed

David Claypool — Wed, 26 Oct 2005 16:08:18 GMT

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=PSD_ES050914_CW01

Re: Management Processor embedded & ilo Failed

Ken Chan_3 — Thu, 27 Oct 2005 17:11:42 GMT

Hi all,

To start with, I have a DL380 G4 using PSP 7.3 and I don't see this ILO failure (ILO is not plugged in). Majority of servers has PSP 7.0.

PSP 7.4 might correct the false iLO failure like the article states, it creates another unwanted iLO Link failure. We don't use the ILO on any servers. This DL380 G4 Windows 2003 server has PSP7.4. In the System Management Homepage > Management Processor > Embedded nec98431 page, it shows the Link Status as failed. It is easy to understand the link will fail if it is not plugged. This Link Status doesn't exist in earlier versions.

Removing the Remote Insight Information from Start > Control Panel > HP Management Agent removes the ILO from the System Management Homepage. Problem solved.

Re: Management Processor embedded & ilo Failed

Andrew Irvine — Tue, 29 Nov 2005 21:59:40 GMT

I have discovered that removing the local agents for Insight resolves all my problems.

"Goto - Control Panel - HP Management Agents on your servers with the problem. Under the services tab click on "Remote Insight Information" then "Remove" then "OK". Then it will prompt you to restart Management agents. When they are restarted, all is ok."

But I now need to make this change to about 600 Servers, does anybody know a way of doing this remotly? i.e. batch or script or maybe even withing Insight Manager?
Thanks in advance.

Re: Management Processor embedded & ilo Failed

Stefan Kirchner — Thu, 01 Dec 2005 07:22:51 GMT

Hi

I have the same problem, but the agents are running on SLES9.0 PSP7.40
How can I disable this feature ?

Thanks

Re: Management Processor embedded & ilo Failed

KarimK — Wed, 04 Jan 2006 12:42:28 GMT

As i have over 150 servers reporting this problem, Does anyone no whether this can be scripted????

Re: Management Processor embedded & ilo Failed

Max Wiberg — Tue, 10 Jan 2006 03:56:45 GMT

On our site we want to USE the "ilo:s".
They show up as not configured which IS correct.
How can I configure them i.e. assign them ip-numbers - so our DL 380.s can be administered through the ILO:s?

Max!

Re: Management Processor embedded & ilo Failed

David Claypool — Tue, 10 Jan 2006 11:32:42 GMT

Max:

You have 3 options:

- Establish DHCP in the network that the iLOs are connected to (since iLO is set to default to DHCP)
- On restart of the systems, use the [F8] key at the appropriate time to go into a ROM-based configuration utility
- Use HPONCFG to apply a configuration on a running system (requires the iLO drivers are loaded). More info at http://www.hp.com/servers/manage --> iLO and to download http://www.hp.com/servers/swdrivers

Stefan:

Check the man page for 'hprsm' for info on starting, stopping and disabling the hprsm service/agents or individual subcomponents...

Re: Management Processor embedded & ilo Failed

Martin Dettbarn — Thu, 09 Mar 2006 18:12:27 GMT

"As i have over 150 servers reporting this problem, Does anyone no whether this can be scripted????"

Damn, I have 1 server doing this and it bugs me. I guess I'll stop complaining :)

Re: Management Processor embedded & ilo Failed

PZel — Thu, 30 Mar 2006 08:32:12 GMT

Has anybody found out how to make a script
for this, as what KarimK was asking ?
(because via Replicate Agent settings
this is not possible)

Re: Management Processor embedded & ilo Failed

mark q — Sat, 22 Mar 2008 22:38:23 GMT

I'm wondering the same thing, to be honest this is very frustrating because along with this if you disable the remote insight information in control panel and you are doing a consolidated firmware upgrade using hpsum, the version control repository manager doesn't pick up that the ilo's have been upgraded even though they have because the agent is loaded..

so is there any way to turn off network notifications for ilo's w/o actually disabling the device?? talk about a catch 22.

Re: Management Processor embedded & ilo Failed

nadogmoney — Wed, 24 Dec 2008 17:04:53 GMT

These are the steps you can take and the pros and cons of each. #4 is by far the best

1. Disable the "HP iLo Management Channel Interface Driver" in Windows Device Manager.

PRO: worked great for the original iLo.

CON: A)iLo2 initially had a very long boot delay if this method was used. It looks like the boot delay has been fixed with a newer driver but I haven't tested it. Info about the problem and the driver fix can be found in HP Document ID: c0086751. B)I am not sure if you would still see the iLo firmware revision or not in the Version Control Agent (VCA).

2. Disable ilo2 in ilo2 specific RBSU
I never tried this way but it seems like it would work. You probably won't get any info from iLo if this was is used (e.g. no firmware updates)

3. Make "Remote Insight Information" agents inactive via the HP Management Agents control panel utility.

PRO: stops the local alarms and SIM alarms. Lots of posts above are asking if this can be scripted and it can. It is a reg hack and it is attached. You need to run "regedit /s ilo_monitor_off.reg"

CON: VCA can't pickup the firmware changes so if you update the iLo firmware it will not be reflected in the VCA.

4. Disable the iLo NIC via hponcfg so it doesn't complain about a link failure.

PRO: Stops the problem at the source! To do this run "hponcfg /f ilo_setup.xml". If you don't have any settings on the ilo then it would also be wise to run "hponcfg /reset" to get factory defaults and start from a clean slate before running the first command. I will attach ilo_setup.xml
NOTE: hponcfg is install as part of the HP PSP

CON: none

Re: Management Processor embedded & ilo Failed

jhns — Fri, 15 Jun 2012 16:46:14 GMT

If you remove the "Remote Insight Information" don't you lose thermal and other information also? I have a similar problem. I'm running SIM 7.3 and I have a management Processor Failed because the iLO is not connected at this time. We are using Avocent on this particular server and I really would like to make this alarm go away. I have several servers using Avocent while the majority of our servers are using iLO. Thanks for any help or info given.