https://community.hpe.com/t5/server-management-systems/hp-sim-sso-certificate-issue/m-p/5802443#M54571 <P>I have a strange one. &nbsp;been testing SIM 7 and ran into some certificate issues.. &nbsp;If the server is in standby mode ie not powered on... I can SSO from SIM to the iLO using certificate based trust with no issue whatsoever... &nbsp; &nbsp;However if that server is powered on, then the certifcate trust becomes invalid...</P><P>&nbsp;</P><P>It works fine by name all of the time...</P><P>&nbsp;</P><P>it works fine if the server is in standby with certificates</P><P>&nbsp;</P><P>i have tried every combo of name/certificate/rediscovery/adding the server before/after certificate name...</P><P>&nbsp;</P><P>very strange...</P><P>&nbsp;</P><P>the hardware is a DL360 g5 (for testing), and have tried HP SIM v6.3/7.1 on windows 2008 and the outcome is the same...</P> Thu, 13 Sep 2012 12:23:06 GMT G0ldenboy 2012-09-13T12:23:06Z https://community.hpe.com/t5/server-management-systems/hp-sim-sso-certificate-issue/m-p/5802443#M54571 <P>I have a strange one. &nbsp;been testing SIM 7 and ran into some certificate issues.. &nbsp;If the server is in standby mode ie not powered on... I can SSO from SIM to the iLO using certificate based trust with no issue whatsoever... &nbsp; &nbsp;However if that server is powered on, then the certifcate trust becomes invalid...</P><P>&nbsp;</P><P>It works fine by name all of the time...</P><P>&nbsp;</P><P>it works fine if the server is in standby with certificates</P><P>&nbsp;</P><P>i have tried every combo of name/certificate/rediscovery/adding the server before/after certificate name...</P><P>&nbsp;</P><P>very strange...</P><P>&nbsp;</P><P>the hardware is a DL360 g5 (for testing), and have tried HP SIM v6.3/7.1 on windows 2008 and the outcome is the same...</P> Thu, 13 Sep 2012 12:23:06 GMT https://community.hpe.com/t5/server-management-systems/hp-sim-sso-certificate-issue/m-p/5802443#M54571 G0ldenboy 2012-09-13T12:23:06Z