topic How to disable iLO monitoring in Server Management - Systems Insight Manager

How to disable iLO monitoring

RBrightwell — Tue, 25 Dec 2012 08:14:01 GMT

I have a few DL380 G4s and we don't utilize the iLO on them. However, SIM(4.2) reports these as being in a "Major" problem status. Is there a way to turn off monitoring of the iLOs?

P.S.This thread has been moved from ITRC server mgmt (Insight Manager 7) Forum to ITRC HP Systems Insight Manager Forum- HP Forums Moderator

Re: How to disable iLO monitoring

Eric Hunter_1 — Tue, 21 Jun 2005 10:41:48 GMT

I was getting similar issues and it was because the card was set to do dhcp by default after I flashed it. Since the iLO card was not attached to any network it produced the error. To take the iLO out of error status I went into it's settings and changed the network settings to blank.

Also I just got this info: There is a tool you can use that supposedly allows you to change the network settings without rebooting the server.
http://h18023.www1.hp.com/support/files/server/us/download/22571.html

Hope that helps.

Re: How to disable iLO monitoring

Keith_164 — Tue, 20 Sep 2005 18:31:12 GMT

We had the same issue on all our new G4 server until I found a post i=on here about putting "remote insight information" in the inactive agents area.

open control panel_>HP Management agents_>move "remote insight information" to the inactive agents tab.

Hopefully that works for you.

Re: How to disable iLO monitoring

RBrightwell — Wed, 21 Sep 2005 08:40:29 GMT

Excellent Keith! That works perfectly. Thanks!

Re: How to disable iLO monitoring

RBrightwell — Wed, 21 Sep 2005 08:42:42 GMT

Solution found in Keith's reply.