topic Re: SIM 5.3 SP1 in Server Management - Systems Insight Manager

SIM 5.3 SP1

subashbl870 — Mon, 14 Jan 2013 03:59:32 GMT

Dear all ,
I have BL460C Server , windows 2008 server 64bit,
and also sql server2005 , i am going to install SIM 5.3 SP1. this Server enough ?
This Server is not a domain Just member of domain with Administrator permision.
what are the step is there for installations
pls help me.

P.S. this thread has been moved from Insight Remote Support > general to ITRC HP Systems Insight Manager Forum - HP Forums moderator

Re: SIM 5.3 SP1

Frauke Denker_2 — Sun, 13 Dec 2009 01:00:05 GMT

Whether your BL460c is enough depends on how many servers you want to monitor (how much memory is installed? it if is at least 2GB and you have a small/medium environment it should be ok) - there is a SIM sizer available at: http://g3w1656g-vip.houston.hp.com/sb/HPSIM/index.asp
Check the install guides for help on the installation - they are available at:
http://h18013.www1.hp.com/products/servers/management/hpsim/infolibrary.html#b2
The install routine will check if all prerequisits are met and inform you if anything else has to be installed prior to the installations. You will need administator right to do the installation - the installation is usually not difficult.

Re: SIM 5.3 SP1

subashbl870 — Sun, 13 Dec 2009 08:11:25 GMT

i had installed successfully SIM 5.1 SP1.i had removed one ML350g server hdd bay . i don't get any information for server status display panel Error like Minor. what can i do this option can i get ?

Re: SIM 5.3 SP1

Maxim Revutskiy — Tue, 15 Dec 2009 06:58:40 GMT

It is out of scope of forum to write how to configure all your HP SIM.
There are a lot of docements to read http://h18013.www1.hp.com/products/servers/management/hpsim/infolibrary.html#b3