Agents for Insight Manager

zzzzzxxhp — Sat, 23 Feb 2013 21:44:11 GMT

Installing Insight manager 7.1 to monitor a bunch of my blade servers. I did the preliminary discovery and found my systems. I noticed that a few of my servers already our SNMP strings added to the server, so I am getting some hardware health from insight manager. Is this all that needs to be done for agents installs? Or is the HP SNMP agent different? Basically I am logging onto the server, going to the windows SNMP service and adding our company strings to the security tab. Is there a need to go to the configure and repair agents section and select the install hp SNMP agent? Is this ok to do on a live server? Is this the preferred agent to use to get basic hardware health?

Also, is there anything I need to worry about when discovery discovers the servers iLO ? Im really just worried about the servers health and having it alert us with issues...

Re: Agents for Insight Manager

Tushar Bajpai — Mon, 25 Feb 2013 10:59:14 GMT

CRA does the same thing that you have done manually.

CRA Task

1) Installing HP SNMP Agent

2) Configure teh Community String if it is different from public

By Default SNMP MIB-2 responds and HPSIM can detect the SNMP Service on the Server. But to get more data related to Memory, Disk, CPU you have install the HP SNMP Agent.

To Check if they are already installed you can check the HPSIM System Manager Page for Health Status or look into the Managed Server Services - for HP Insight NIC Agent Service.

There are no issues installing on the live server.

topic Agents for Insight Manager in Server Management - Systems Insight Manager

Agents for Insight Manager

Re: Agents for Insight Manager