https://community.hpe.com/t5/server-management-systems/status-changes-not-showing-up-in-system-status-box-for-uncleared/m-p/6295077#M57760 <P>Hi,</P><P>&nbsp;</P><P>Ive just set up an HPSIM 7.2 console for windows servers and what I have found is when the system state of a device changes (Hard disk failure, network failure, Array battery&nbsp;etc) the all servers view changes under the HS column but that event doesnt show up in the System status uncleared events&nbsp;at the same time, so its very difficult for me to see at a glance any new events or failures&nbsp;in the console. I have 900 devices currently in there so its impossible to check each one every day to see if there has been a change or failure.</P><P>Can anyone tell me how I can rectify this? We had an old 6.3 console and this worked fine but not on the new one.</P><P>We do get status changes to the uncleared event status counts but they only seem to&nbsp;be system inaccessible&nbsp;and accessible messages and internal HP messages like failed login attempts or&nbsp;data collection timeouts.</P><P>&nbsp;</P><P>Can anyone suggest anything to try and this makes a daily easy task quite difficult.</P><P>&nbsp;</P><P>Thanks In Advance</P> Thu, 05 Dec 2013 11:13:37 GMT Marvin99 2013-12-05T11:13:37Z https://community.hpe.com/t5/server-management-systems/status-changes-not-showing-up-in-system-status-box-for-uncleared/m-p/6295077#M57760 <P>Hi,</P><P>&nbsp;</P><P>Ive just set up an HPSIM 7.2 console for windows servers and what I have found is when the system state of a device changes (Hard disk failure, network failure, Array battery&nbsp;etc) the all servers view changes under the HS column but that event doesnt show up in the System status uncleared events&nbsp;at the same time, so its very difficult for me to see at a glance any new events or failures&nbsp;in the console. I have 900 devices currently in there so its impossible to check each one every day to see if there has been a change or failure.</P><P>Can anyone tell me how I can rectify this? We had an old 6.3 console and this worked fine but not on the new one.</P><P>We do get status changes to the uncleared event status counts but they only seem to&nbsp;be system inaccessible&nbsp;and accessible messages and internal HP messages like failed login attempts or&nbsp;data collection timeouts.</P><P>&nbsp;</P><P>Can anyone suggest anything to try and this makes a daily easy task quite difficult.</P><P>&nbsp;</P><P>Thanks In Advance</P> Thu, 05 Dec 2013 11:13:37 GMT https://community.hpe.com/t5/server-management-systems/status-changes-not-showing-up-in-system-status-box-for-uncleared/m-p/6295077#M57760 Marvin99 2013-12-05T11:13:37Z https://community.hpe.com/t5/server-management-systems/status-changes-not-showing-up-in-system-status-box-for-uncleared/m-p/6295525#M57767 Hello Marvin,<BR /><BR />The server status is changed in 2 cases.<BR />When the server is polled from the Sim server the status changes but no. event is logged.<BR />When the server agent detects an error and a trap is send the sim server sees this and logs an event.<BR /><BR />In the second case you can configure that you want to recieve an email. So you probably don't have traps configured.<BR />These traps can be snmp or wbem repending on OS and choice . Traps can be set from Sim with a repair command for a set of servers. Devices need to be configured seperatly.<BR /><BR />Kind regards,<BR /><BR />Andrew Thu, 05 Dec 2013 18:10:15 GMT https://community.hpe.com/t5/server-management-systems/status-changes-not-showing-up-in-system-status-box-for-uncleared/m-p/6295525#M57767 Andrew_Haak 2013-12-05T18:10:15Z