topic Re: Error: Unable to execute /opt/hp/hpsmh/data/cgi-bin/snmpagent/SetSNMPData.cgis in Server Management - Systems Insight Manager

Error: Unable to execute /opt/hp/hpsmh/data/cgi-bin/snmpagent/SetSNMPData.cgis

pgustavsson — Fri, 03 Jan 2014 13:56:42 GMT

Hi,

I have installd the HP Health agents version 9.40 on my Ubuntu 10.04LTS servers.

I am unable to clear the integrated management logs through the system management homepage.

If i select an entry and click "Mark selected items repaired" or if i click "Mark all items repaired"

Then i only get the following error message "Error: Unable to execute /opt/hp/hpsmh/data/cgi-bin/snmpagent/SetSNMPData.cgis"

The file is not executable on the system, if i try and set it to be executable, i get no error message at all, but the IML entry does not get cleared.

This works fine on Ubuntu 10.04 using the 8.50 hp health package.

Anyone seen this or have any suggestions as to what i can try?

Many thanks for any imput.

Br
Patric Gustavsson

Re: Error: Unable to execute /opt/hp/hpsmh/data/cgi-bin/snmpagent/SetSNMPData.cgis

Andrew_Haak — Fri, 03 Jan 2014 17:49:45 GMT

Hello there,

I gues you use SNMP as a dataprovider, did you also create a SNMP write comunity in your Snmpd.conf?

Kind regards,

Andrew

Re: Error: Unable to execute /opt/hp/hpsmh/data/cgi-bin/snmpagent/SetSNMPData.cgis

pgustavsson — Wed, 15 Jan 2014 14:52:59 GMT

Hi,

Yes i have, i have tried with these two setups in snmpd.conf (one a direct copy of my working setup on ubunty 10.04)

/etc/snmp/snmpd.conf (working on ubuntu 10.04)

dlmod cmaX /usr/lib64/libcmaX64.so

rocommunity INLIGHT2

rwcommunity INLIGHT

trapcommunity INLIGHT

trapsink dnsname.of.my.hpsim.com INLIGHT

authtrapenable 1

syscontact Root <root@localhost> (configure /etc/snmp/snmpd.local.conf)

syslocation Unknown (configure /etc/snmp/snmpd.local.conf)

com2sec readwrite 10.211.111.222 INLIGHT

# Second, map the security names into group names:

# sec.model sec.name

group MyROSystem v1 paranoid group

MyROSystem v2c paranoid group

MyROSystem usm paranoid group

MyROGroup v1 readonly group

MyROGroup v2c readonly group

MyROGroup usm readonly group

MyRWGroup v1 readwrite group

MyRWGroup v2c readwrite group

MyRWGroup usm readwrite

#### # Third, create a view for us to let the groups have rights to:

# incl/excl subtree mask

view all included .1 80

view system included .1.3.6.1.2.1.1

#view system included .iso.org.dod.internet.mgmt.mib-2.system

#### # Finally, grant the 2 groups access to the 1 view with different

# write permissions:

# context sec.model sec.level match read write notif

access MyROSystem "" any noauth exact system none none

access MyROGroup "" any noauth exact all none none

access MyRWGroup "" any noauth exact all all none

# -----------------------------------------------------------------------------

/etc/snmp/snmpd.conf (new config not working either)

dlmod cmaX /usr/lib/libcmaX64.so
rwcommunity INLIGHT 127.0.0.1
rocommunity INLIGHT2 127.0.0.1
rwcommunity INLIGHT myhpsim.dns.name.com
trapcommunity INLIGHT
trapsink myhpsim.dns.name.com INLIGHT
syscontact patric.gustavsson@myemail.com
syslocation Town
com2sec local     localhost           INLIGHT
com2sec mynetwork 136.111.111.0/23    INLIGHT
group MyRWGroup v1         local
group MyRWGroup v2c        local
group MyRWGroup usm        local
group MyROGroup v1         mynetwork
group MyROGroup v2c        mynetwork
group MyROGroup usm        mynetwork
view all    included .1                               80
access MyROGroup ""      any       noauth    exact all    none   none
access MyRWGroup ""      any       noauth    exact all    all    none

Br
Patric

Re: Error: Unable to execute /opt/hp/hpsmh/data/cgi-bin/snmpagent/SetSNMPData.cgis

kkpro — Fri, 24 Jan 2014 11:18:26 GMT

Same error here. My snmpd.conf only has ro-, rw- and trapcommunty.

Re: Error: Unable to execute /opt/hp/hpsmh/data/cgi-bin/snmpagent/SetSNMPData.cgis

ericj123 — Wed, 19 Mar 2014 05:18:27 GMT

I was able to get this working by modifiying permissions on SetSNMPData.cgis to 755 and setting the group from root to hpsmh and by making sure the snmp config has a read/write commuity enabled.

Hope this helps someone else...

Eric

Re: Error: Unable to execute /opt/hp/hpsmh/data/cgi-bin/snmpagent/SetSNMPData.cgis

pgustavsson — Fri, 04 Apr 2014 13:38:44 GMT

Hi,

Many thanks for the reply and suggestion!

i have tried the method that helped you, i set the SetSNMPData.cgis file to 755 , however the group owner of the file is already set to hpsmh.

Now i no longer get any error message, but i still cannot clear any errors in the iml log, the log list just reloads without clearing the error :(

Any other suggestions are most welcome!

Br
Patric

Re: Error: Unable to execute /opt/hp/hpsmh/data/cgi-bin/snmpagent/SetSNMPData.cgis

pgustavsson — Fri, 11 Apr 2014 08:27:09 GMT

Update!

This solved it for me :

chmod 755 /opt/hp/hpsmh/data/cgi-bin/snmpagent/SetSNMPData.cgi

AND

chmod 755 /opt/hp/hpsmh/data/cgi-bin/snmpagent/SetSNMPData.cgis

Many thanks to ericj123 who lead me in the right direction!