topic Re: can't register vm host in Server Management - Systems Insight Manager

can't register vm host

Chang Che-Lun — Fri, 03 Jan 2014 00:36:24 GMT

I select some vmhost and click[Configuration->Virtual Machine->Register Virtual Machine Host],

But it will show me the error messages!

How to fix this error?

thanks!

Re: can't register vm host

Tushar Bajpai — Mon, 06 Jan 2014 10:07:46 GMT

Please discover the vCenter Node with VME Credentials.

Select the Node, Go To Options -> Add and Edit VME -> Provide the vCenter Creds.

Check the node for vCenter, VME subtype added after this and then try registering the host.

Re: can't register vm host

Chang Che-Lun — Tue, 07 Jan 2014 01:58:01 GMT

Hi Bajpai

My VCenter is also an vm guest,

I can't sure is SIM can accept a vcenter of a guest os type!

when I add the vme information,

I sure my account and password is correct,

but the SIM tell me an error

[Invalid inpurt has been enterd.Username,password and port must be specified correct]

Is any configuration that I missing?

Re: can't register vm host

Tushar Bajpai — Tue, 07 Jan 2014 04:45:28 GMT

Error means that vCenter Username / Password are not correct.

Please select correct protocol that is VME (vCenter) with port 443 (default if not change), provide the same creds as used in vSphere Client to connect. If connected a popup will appear.

Re: can't register vm host

Chang Che-Lun — Tue, 07 Jan 2014 23:43:18 GMT

Hi Bajpai

I try it,

I can login Vcenter by viclient,

but when I use the same account and password to set the VME,

it will appear the error!

Can the vCenter can be a vmguest?

Re: can't register vm host

Tushar Bajpai — Wed, 08 Jan 2014 10:42:11 GMT

vCenter can be installed on a VM but not on CMS. Check for the vCenter node having below given attributes:

1) OS Name

2) UUID

if above listed attributes found then try the following below, otherwise delete the node and discover again.

1. On command prompt change the directory to “C:\Program Files\HP\Insight Control virtual machine management\clientapi\bin (file:///C:/Program%20Files/HP/Insight%20Control%20virtual%20machine%20management/clientapi/bin)>”

2. Execute command "adminlogin.cmd "
3. Execute cli "getRegisteredVE –VELayer VMware" (This command will result all the registered VCenters with vmm)

if the node is found here, please run 4.
4. Execute cli "unregisterVME –VELayer VMware –host <ipaddress of the phantom VCenter ip, this should be there in the registeredVME list>"

Now try again to register.

Re: can't register vm host

Chang Che-Lun — Thu, 09 Jan 2014 07:12:24 GMT

Hi Bajpai

I found the attribute in cms has OS Name and UUID

but when I run the cli ,

I can run the [cli getRegisteredVE –VELayer VMware],

it show me [ok] (I don't sure that's mean the node is been found)

but when I run the [cli unregisterVME –VELayer VMware –host 192.168.0.80]

it show me error [Unrecognized Option: -VELayer]

Is something wrong ?

Thanks!

Re: can't register vm host

Tushar Bajpai — Thu, 09 Jan 2014 14:35:45 GMT

You can raise a case with HP Support. looks like something is going wrong.

Re: can't register vm host

Chang Che-Lun — Fri, 10 Jan 2014 00:18:55 GMT

Hi Bajpai：

I found the command maybe some error,

So I edit it,

and run again,

but I get the result

the error tell me：The vCenter server specified is not managed by VMM,

How to fix it?

Thanks!