topic Re: 3Par monitoring - No HP Document in Server Management - Systems Insight Manager

3Par monitoring - No HP Document

manishk — Tue, 17 Dec 2013 09:55:48 GMT

Need to know exact configuration steps to be done on 3Par devices so that it can be properly managed from HP SIM.

Not much relevant info on net.

Re: 3Par monitoring - No HP Document

Tushar Bajpai — Tue, 24 Dec 2013 11:20:16 GMT

For HPSIM 3Par is another SMI-S Enabled device and works the same way as others.

3Par Supports SNMP and is SMI-S compliant. you can make use of both the avaiable protocol to

monitor the storage device with correct SNMP Community String and WBEM Creds.

Re: 3Par monitoring - No HP Document

manishk — Thu, 02 Jan 2014 09:58:38 GMT

Hi Tushar,

Thanks for your assistance.
But i need some document/link from HP to know the steps to monitor 3PAR devices.

Also no document is available for steps to configure other devices like CiSCO & Brocade switches and Left Hand storage nodes to properly monitor from HP-SIM.

It will be helpful if you can provide few links/docs regarding the steps.

Regards

Manish

Re: 3Par monitoring - No HP Document

Tushar Bajpai — Wed, 08 Jan 2014 08:53:00 GMT

Please find the document attched for configuring 3PAR CIMOM.

After the cimom is configured, discover the device in HPSIM using the IP Address.

Re: 3Par monitoring - No HP Document

Bart_Heungens — Wed, 08 Jan 2014 09:04:13 GMT

Hi,

I have written a blog article on the steps on the 3PAR to enable monitoring inside HP SIM. I had to do this for several customers, works fine...

http://www.bitcon.be/?p=1875

Kr,

Bart