topic Re: First Time HP SIM Installation in Server Management - Systems Insight Manager

First Time HP SIM Installation

SimIT — Mon, 01 Sep 2014 07:26:24 GMT

Hi I am preparing for First Time HP SIM Installation.

Server hardware is ready.

What are the prerequisites for Software? Can anybody suggest

Re: First Time HP SIM Installation

Andrew_Haak — Mon, 01 Sep 2014 12:44:59 GMT

Hello there,

Sure i can but i guess you don't like to read the readme on http://www8.hp.com/h20195/v2/GetDocument.aspx?docname=c04154481

In short, look at page 7 and below. Windows and Linux is supported and you can even run it on a virtual server.

If you need more info, be more specific.

Re: First Time HP SIM Installation

Bart_Heungens — Mon, 01 Sep 2014 13:36:47 GMT

Hi,

When you launch the installation software you will be proposed to run the Installation Advisor...

He will detect for you missing software, updates and/or prerequisites...

See that the Advisor is green (which means OK) and your installation of SIM will succeed as well...

Kr,

Bart

Re: First Time HP SIM Installation

SimIT — Tue, 02 Sep 2014 07:36:49 GMT

Thanks Andrew and Bart.
I have below query:
I want to configure SIM for email alerts only. What would be the addtional requirement fro that. Also would I need any MIB??
What about the database? DO I have to have it separately.
What about the licenses? Is it not a freeware?

Re: First Time HP SIM Installation

Andrew_Haak — Tue, 02 Sep 2014 07:56:51 GMT

Hello again,

you need MIB's on your SIM server (they are included), otherwise you can't translate the SNMP trap events you will get from your servers. There is also the option to install a Express version (Free) on the local system. That is a good option for non enterprise enviroments. And SIM will request a licence, but since it's free that should not be a problem. You can generate a licence on the HP website. https://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=HPSIM-LIC

Re: First Time HP SIM Installation

Bart_Heungens — Tue, 02 Sep 2014 12:00:26 GMT

Hi,

For this typical setup indeed go for the free inlucded SQL express version... Installed together with HP SIM...

On the licenses it depends what you want to do... If it is only monitoring yes you can do this for free... Including alerting (which is called automatic event handling in SIM) by sending mails for instance...

If you want to 'control' your environment you will need Insight Control which runs on top of (and is dependent of) HP SIM... The software is free but the managed servers you will need a Insight Control license. 60 day trial available on the website mentioned above...

But if it is only for monitoring you are good with the free version...

Kr,

Bart

Re: First Time HP SIM Installation

SimIT — Tue, 02 Sep 2014 12:24:05 GMT

Thanks Both again.

I would proceed with typical install. I need only for monitoring ane email alerts.

I would start with HP SIM 7.3 on Windows CMS.

Re: First Time HP SIM Installation

Andrew_Haak — Tue, 02 Sep 2014 12:29:12 GMT

Hello again,

Good luck with the install, if you have any other questions let us know!

Re: First Time HP SIM Installation

SimIT — Thu, 04 Sep 2014 12:18:24 GMT

I read in SIM installation that .net framework shud be downloaded...is it mandatory?

Re: First Time HP SIM Installation

Andrew_Haak — Thu, 04 Sep 2014 16:45:39 GMT

Hello agsin,

My SIM server has .NET. installed on Windows 2008 R2, but just run the installer and find out. If the installer does not complain i would not install it.