topic Re: HP SIM / VCRM / VCA - Software Status Unknown (VCA-VCRM communication issues) in Server Management - Systems Insight Manager

HP SIM / VCRM / VCA - Software Status Unknown (VCA-VCRM communication issues)

CJPerez — Mon, 01 Sep 2014 15:56:23 GMT

Hi there,

I have the following platform installed HP SIM:

VMWare Virtual Server:

HP SIM Version:

HP VCRM:

HP VCRM is "Trusted" and I can access the content.

On the client side, for instance, I have a HP DL308 G7 with HP SMH 7.3.3.1 and 7.3.2.0 VCA. From the SMH \ VCA agent connects to the VCRM by certificate, assigned the baseline and reports the software without problems:

In HP SIM, I have assigned the baseline for the server. For now, all right. The problem comes when I try to view the status of the software I listed as "unknown status".

In the server properties in the section "Software / Firmware Baselines" does not show the columns of "Support Pack Version" nor the "Latest Version":

In the section "Manage Communications" shows the following error:

Any Idea?

Re: HP SIM / VCRM / VCA - Software Status Unknown (VCA-VCRM communication issues)

Andrew_Haak — Mon, 01 Sep 2014 18:38:03 GMT

Hello there,

You also have to set the baseline in SIM. Choose Deploy from the menu and select Manage Software/Firmware baselines.

Here you have to choose the VCRM repository on the top right. Now you can see the baselines you have defined in your VCRM. Now that you see your baselines you can add servers to the baselines. Choose the servers save them and wait till you see a status icon before your baseline. Now the baseline is set for the servers you selected.

Re: HP SIM / VCRM / VCA - Software Status Unknown (VCA-VCRM communication issues)

CJPerez — Tue, 02 Sep 2014 07:12:10 GMT

Sorry, I forgot to add that info. In HP SIM are assigned the Baselines:

Re: HP SIM / VCRM / VCA - Software Status Unknown (VCA-VCRM communication issues)

Andrew_Haak — Tue, 02 Sep 2014 07:44:21 GMT

Hello again,

The SW button is blue, did you reboot your SIM server ? Or if that is not an option you could try to restart the VCRM and Insight Manager service. I'm afraid that i have some server that also have the blue button. Some servers are green and some are blue. That would indicate that this could be an bug.

The system itself is discovered correct if you look at the screenshot at Installed Version. You could try to delete the system from SIM rediscover add it to the baseline and see. So as you can read not a rocksolid solution but you could give it a try.

One thing i saw in my config that if you add a server to the baseline you should wait a wile after the save and see if the server gets added. Did you add other servers that do work ?

If you look at the screenshot i atached you can see a baseline, if i click on the view assigned Systems i see the server i just added, you you also see this in your setup?

Re: HP SIM / VCRM / VCA - Software Status Unknown (VCA-VCRM communication issues)

CJPerez — Tue, 02 Sep 2014 08:54:40 GMT

I'm afraid that right now reboot the server is not an option, since they lose access to the VCRM from HP SIM for 3-4 h that it takes to check the catalog.

During the checking of the catalog, any action on the Baselines, gives error because VCRM this busy server.

Test delete server and rediscover it already have done it in a couple of occasions.

The server where our data is an example. I have this problem with all servers.

I do not see the screenshot that you have attached, but if, in the view by Baselines see the assigned servers. all my servers, are assigned to the same baseline.

On the other hand what seems to me to be more suspicious is, although I have evidence of communication between the VCA and the VCRM, connectivity testing from HP SIM indicating me that there isn't.

Regards

Re: HP SIM / VCRM / VCA - Software Status Unknown (VCA-VCRM communication issues)

Andrew_Haak — Tue, 02 Sep 2014 11:29:21 GMT

Hello again,

How many baselines do you have loaded ? Is the auto download on in the VCRM ? I would recomend to manualy download the SPP's you need. This should help on the time it takes to run the catalog on the VCRM .

Re: HP SIM / VCRM / VCA - Software Status Unknown (VCA-VCRM communication issues)

CJPerez — Tue, 02 Sep 2014 11:52:25 GMT

I have 9 Basselines in VCRM.

Yes, i have autoupdate activated.

Re: HP SIM / VCRM / VCA - Software Status Unknown (VCA-VCRM communication issues)

Andrew_Haak — Tue, 02 Sep 2014 12:25:03 GMT

Hello again,

I've disabled the autodownload feature and upload a max of 3 baselines by hand. This way you keep control of what gets in the repository. Could be an option for you ??

Re: HP SIM / VCRM / VCA - Software Status Unknown (VCA-VCRM communication issues)

CJPerez — Tue, 02 Sep 2014 14:30:20 GMT

I have disabled the VCRM automatic updates.
I have updated the latest hotfixes from HP SIM.
now is checking the repository. When finished I will try cleaning the repository and allow the minimum possible software.

Re: HP SIM / VCRM / VCA - Software Status Unknown (VCA-VCRM communication issues)

Andrew_Haak — Tue, 02 Sep 2014 15:13:53 GMT

Hello agsin,

You could also switch the directory the VCRM looks in unpack a SPP and see what happens. If needed unpack a second SPP.

This way you can switch between the repositories.

Re: HP SIM / VCRM / VCA - Software Status Unknown (VCA-VCRM communication issues)

CJPerez — Wed, 03 Sep 2014 13:11:14 GMT

by the moment, the software status is ok with the new repository folder and only 1 SPP in the catalog...

Thanks!