Version Control Respository Manager - "The specified repository is invalid or not reachable"

DenverM — Mon, 27 Apr 2015 03:02:10 GMT

I've been racking my brain on this one. I set up VCRM on a server a few months ago and was getting "The specified repository, [server], is invalid or not reachable". After a couple of months of research, I find a post that suggests doing these command lines:

C:\HP\hpsmh\bin>smhconfig.exe -Z ALL:!ADH:!EXPORT56:!EXPORT40:DES-CBC3-SHA:RC4-MD5:RC4-SHA:RC4+RSA:+HIGH:+MEDIUM:-SSLv2:+EXP:!LOW:!eNULL:!aNULL

C:\HP\hpsmh\bin>smhconfig.exe -r

At first, this didn't seem to work. Then one day it did and the server was working fine for a few months. Now I'm getting the same error message. The above fix does not work.

Tried installing on different servers, no luck. Checked firewall, no change. Tried IP and fqdn. Made sure have latest SMH and VCRM.

Any ideas?

Thanks

P.S. This thread has been moved from ProLiant Servers (ML,DL,SL) to ITRC HP Systems Insight Manager Forum. - Hp Forum moderator

Re: Version Control Respository Manager - "The specified repository is invalid or not reachable

Andrew_Haak — Mon, 27 Apr 2015 07:19:45 GMT

Hello,

You should install the latest VCA to connect to the VCRM. This because of the encription problems between the older VCA and the between SMH. VCA first connect to the VCRM trough the SMH of the server it wants to get the baseline from.

topic Version Control Respository Manager - "The specified repository is invalid or not reachable" in Server Management - Systems Insight Manager

Version Control Respository Manager - "The specified repository is invalid or not reachable"

Re: Version Control Respository Manager - "The specified repository is invalid or not reachable