topic Re: Firmware states - Installed Active and Installed Inactive in Server Management - Systems Insight Manager

Firmware states - Installed Active and Installed Inactive

SvilenSul — Thu, 06 Aug 2015 11:17:06 GMT

Hello all,

On SIM 7.4 when you go to a System Page of a certain managed server, there is Firmware And Software Revisionis menu. There are displayed different Sys and DLL files with their current versions and state. My questions is: What exactly states "Installed Active" and "Instaled Inactive" mean?

Attached is a screenshot.

Re: Firmware states - Installed Active and Installed Inactive

Andrew_Haak — Fri, 07 Aug 2015 09:51:11 GMT

Active and passieve on a bios i get, dual bios with active and passive chip. Software on the other hand, how an executable can be inactive i don't know.

Re: Firmware states - Installed Active and Installed Inactive

SvilenSul — Mon, 10 Aug 2015 07:53:52 GMT

Thanks Andrew. But my problem is that is messing up my reports. Once a fitware is reported Installed Inactive, in the software management reports you don`t see the new version avaialble in the SPP.

Re: Firmware states - Installed Active and Installed Inactive

Andrew_Haak — Wed, 12 Aug 2015 08:50:02 GMT

Hello again, I've looked in my own setup, but inactive seems be be a bogus state. One of the inactive installed files on one of my servers is the hpshmd.exe. This piece of software is always online so the Inactive state is pointless.

Re: Firmware states - Installed Active and Installed Inactive

SvilenSul — Wed, 12 Aug 2015 08:56:53 GMT

Thanks again Andrew. When you do a software status report, do you have those marked as "Inactive" reported with the latest avaialble verions?

Re: Firmware states - Installed Active and Installed Inactive

Andrew_Haak — Wed, 12 Aug 2015 09:00:51 GMT

Yes, I only see one version of the file and that is the installed and running version.