topic How can i ignore alerts from ILO for power redudancy on a server with 1 PSU in Server Management - Systems Insight Manager

How can i ignore alerts from ILO for power redudancy on a server with 1 PSU

cesarpegado — Mon, 16 Nov 2015 14:42:49 GMT

The ILO on my server is showing the power has issues, due to the fact it doesn't have 2 psu's.

I'm aware this server only has 1 psu, and i'm happy to accept that.

screen shot from the ILO shown

p.s i don't know if thats because we have the screen shot shows its in high efficiency mode, and set to balanced?

Re: How can i ignore alerts from ILO for power redudancy on a server with 1 PSU

Andrew_Haak — Tue, 17 Nov 2015 20:32:35 GMT

I believe you get the error because of the powersetup. Look there if you can reset the power settings to default. It seems the once where 2 powersupplies.

Re: How can i ignore alerts from ILO for power redudancy on a server with 1 PSU

cesarpegado — Fri, 20 Nov 2015 14:37:16 GMT

just to clarify the psu is set to HP Static High Performance Mode, thats about the only setting i could see. Thats what we set all our server too, but most of the servers do have 2 psu installed, where as this does only have the 1,

Is there a way in sim of telling it to just ignore this alert from this 1 server?

Re: How can i ignore alerts from ILO for power redudancy on a server with 1 PSU

Andrew_Haak — Fri, 20 Nov 2015 21:00:54 GMT

simply, no you can ignore a server/object or a type of event. I can check the PSU setting for you on monday.