https://community.hpe.com/t5/server-management-systems/bug-with-mxnode-and-w-parameter/m-p/6884287#M60971 <P>Running HP SIM 7.5 Update 1.</P><P>Adding a new node using "mxnode -a 1.2.3.4" completes very quickly (less than 5 seconds).</P><P>Adding a new node with the -w (wait) parameter (such as "mxnode -a 1.2.3.4 -w")&nbsp;takes a few minutes as expected.</P><P>I find that once I have used the -w parameter, all future runs of "mxnode -a 1.2.3.4" behave as if -w is specified by&nbsp;blocking until completed. &nbsp;</P><P>I found that I have to restart the "HP Systems Insight Manager" service to get "mxnode -a 1.2.3.4" behavior back to normal.</P><P>&nbsp;</P> Mon, 01 Aug 2016 22:16:27 GMT upAndup448768 2016-08-01T22:16:27Z https://community.hpe.com/t5/server-management-systems/bug-with-mxnode-and-w-parameter/m-p/6884287#M60971 <P>Running HP SIM 7.5 Update 1.</P><P>Adding a new node using "mxnode -a 1.2.3.4" completes very quickly (less than 5 seconds).</P><P>Adding a new node with the -w (wait) parameter (such as "mxnode -a 1.2.3.4 -w")&nbsp;takes a few minutes as expected.</P><P>I find that once I have used the -w parameter, all future runs of "mxnode -a 1.2.3.4" behave as if -w is specified by&nbsp;blocking until completed. &nbsp;</P><P>I found that I have to restart the "HP Systems Insight Manager" service to get "mxnode -a 1.2.3.4" behavior back to normal.</P><P>&nbsp;</P> Mon, 01 Aug 2016 22:16:27 GMT https://community.hpe.com/t5/server-management-systems/bug-with-mxnode-and-w-parameter/m-p/6884287#M60971 upAndup448768 2016-08-01T22:16:27Z