Creating Custom Baseline

squesnel01 — Fri, 03 Mar 2017 18:18:51 GMT

Hi,

What is the process of creating a custom baseline for HPE SIM? Here's what I did but it is not working, what did I do wrong?

1. Download required firmware/drivers

2. Copy them in the VCRM Repository

3. Create a custom baseline including the new firmware/drivers

4. Once it appears in HPE SIM, apply it to equipment

5. Run the tasks Software Version Status Polling

The problem I have after that is that when I compare the equipment with the baseline, it says "No Data". But when I look at the equipment itself, everything has been discovered, so the credentials are fine. What should I try?

Thanks,

Re: Creating Custom Baseline

Andrew_Haak — Sat, 04 Mar 2017 20:51:16 GMT

Hello,

If you want to update your server by using a custom baseline you should look at HP SUM for creating a baseline and updating.

HP VCRM is an old way of updating your servers. Use a base SPP and create your own baselines from there.

topic Re: Creating Custom Baseline in Server Management - Systems Insight Manager

Creating Custom Baseline

Re: Creating Custom Baseline