topic Re: Error trying to run a command line tool on a server from CMS in Server Management - Systems Insight Manager

Error trying to run a command line tool on a server from CMS

Randy Price_1 — Mon, 11 Jul 2005 08:25:23 GMT

I have an issue when trying to issue a command line tool from the CMS to a server that is listed. Everytime I issue a command such as Dir on any server other than the CMS I receive the following error under Tool Ok to launch?:

No, does not support the SSH protocol.

I tried to use ssh from the command line on the CMS itself using this command:

ssh user@server and was able to login successfully.

I was able to also push the Proliant Support Paq out with the OpenSSH package successfully as well. (At least it seemed to work). I have looked for this error and haven't found anything. Any help would be appreciated.

Re: Error trying to run a command line tool on a server from CMS

David Gibbons_2 — Fri, 11 Nov 2005 13:56:17 GMT

I think remote systems do not have the CMS key installed correctly. Try running mxagentconfig against the managed nodes and please review the white papers on setting up SSH on managed nodes. Go to the information libarary at www.hp.com/go/hpsim.

Mxagentconfig is ran on the CMS and targets the managed nodes to setup the SSH keys so scripting will function correctly between the CMS and the managed node.

Hope this helps.

Re: Error trying to run a command line tool on a server from CMS

David Claypool — Thu, 02 Feb 2006 15:04:19 GMT

Bumped to be above moved questions...