Export WBEM Sensor Status

trevrobwhite — Fri, 21 Sep 2012 14:50:01 GMT

Hi everyone,

I did search the board, so I'm hoping someone will be able to help, I'm a bit of a noob when it comes to HP Sim.

Normally we use our own inhouse software and monitor via the ILO but were forced to use HP Sim since deploying a VmWare ESXi on a Proliant DL380 with 6 trays of attached storage.

We are using HP Sim 6.3 because the only server available is Windows 2003 R1 x86

I've installed the offline bundle and HP Sim can see all the trays which is excellent, but I have two problems.

1. (Minor) - the server status shows as degraded as there is nothing plugged into the HBA card and two of the NIC's is is possible to ignore these from the monitoring?

2. (Main Issue) - Is there any way to query HP Sim or schedule a report to give me the status of all the WBEM sensors for a particular host, so we could export this regularly and integrate into our existing monitoring solution, or even any tools to query the Offline bundle direct and bypass HP Sim

Any help would be appreciated.

Many thanks.

topic Export WBEM Sensor Status in Server Management - Systems Insight Manager

Export WBEM Sensor Status