topic Re: SMH with WBEM shows error on P440ar controller in Server Management - Systems Insight Manager

SMH with WBEM shows error on P440ar controller

LesRMed — Mon, 02 Nov 2020 22:17:35 GMT

ML350 Gen 9 w/ fresh Windows 2016 Hyper-V install. SMH shows error on RAID controller and no drives shown, iLO shows everything fine. What am I missing?

WBEM

iLO

Re: SMH with WBEM shows error on P440ar controller

SanjeevGoyal — Tue, 03 Nov 2020 10:05:28 GMT

Hello,

Please check/update the SMH version and if not the latest.

or update the latest SPP from the below link.

Service Pack for ProLiant

https://support.hpe.com/hpsc/swd/public/detail?swItemId=MTX_a6c5d766234d4505b0bba6bb0c#tab-history

If you feel this was helpful please click the KUDOS! thumb below!

Regards,

Re: SMH with WBEM shows error on P440ar controller

StorageMike — Tue, 03 Nov 2020 10:21:12 GMT

Not a direct answer to your question... I would recommend updating your drive firmware as per the following

https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00102353en_us

Re: SMH with WBEM shows error on P440ar controller

LesRMed — Tue, 03 Nov 2020 13:36:15 GMT

SMH is up to date 7.6.6.2

Re: SMH with WBEM shows error on P440ar controller

LesRMed — Tue, 03 Nov 2020 13:37:37 GMT

Thanks for catching that @StorageMike. Firmare has now been updated!

Re: SMH with WBEM shows error on P440ar controller

LesRMed — Thu, 05 Nov 2020 20:59:49 GMT

Just as a follow-up, I ditched WBEM and went to SNMP and everything is good now.