https://community.hpe.com/t5/server-management-systems/sim-4-1-mib-update-windows/m-p/3389898#M6292 After applying the above the cmd window sat for over 20 hours without getting back to the command prompt.<BR /><BR />Is there anyway that I can tell if the mibs updated correctly? Wed, 29 Sep 2004 10:37:23 GMT Annette Jones_2 2004-09-29T10:37:23Z https://community.hpe.com/t5/server-management-systems/sim-4-1-mib-update-windows/m-p/3389898#M6292 After applying the above the cmd window sat for over 20 hours without getting back to the command prompt.<BR /><BR />Is there anyway that I can tell if the mibs updated correctly? Wed, 29 Sep 2004 10:37:23 GMT https://community.hpe.com/t5/server-management-systems/sim-4-1-mib-update-windows/m-p/3389898#M6292 Annette Jones_2 2004-09-29T10:37:23Z https://community.hpe.com/t5/server-management-systems/sim-4-1-mib-update-windows/m-p/3389899#M6293 Alas there is no command to reference or have I missed something.<BR />If you were applying a specific MIB, then that MIB should now be visible in HPSIM under the Options / Events / SNMP Trap Settings.<BR />If you were applying a general MIB Update I would assume it has not worked. Wed, 29 Sep 2004 15:37:42 GMT https://community.hpe.com/t5/server-management-systems/sim-4-1-mib-update-windows/m-p/3389899#M6293 Rob Buxton 2004-09-29T15:37:42Z