https://community.hpe.com/t5/server-management-systems/riblo-data-through-sim/m-p/3405233#M6805 Does SIM have the capability to gather all the data from RIB's such as Auxiliary Power and KVM are connected ok. I've set the I've set the IM7 integration to high on the RIB, but still the level of data returned on the SIM console is very low. Thu, 21 Oct 2004 11:57:45 GMT Jay Gurbani 2004-10-21T11:57:45Z https://community.hpe.com/t5/server-management-systems/riblo-data-through-sim/m-p/3405233#M6805 Does SIM have the capability to gather all the data from RIB's such as Auxiliary Power and KVM are connected ok. I've set the I've set the IM7 integration to high on the RIB, but still the level of data returned on the SIM console is very low. Thu, 21 Oct 2004 11:57:45 GMT https://community.hpe.com/t5/server-management-systems/riblo-data-through-sim/m-p/3405233#M6805 Jay Gurbani 2004-10-21T11:57:45Z https://community.hpe.com/t5/server-management-systems/riblo-data-through-sim/m-p/3405234#M6806 The status of the Auxiliary Power should be displayed by HPSIM. Although on ours it has an Orange Flag and the status is connected internally. So I'm not too sure what that means. Note this is on the Management Processor section of the Server the RIB is installed in.<BR /><BR />I don't think the RIB will care if the console or KVM is connected or not. After all its main function is to facilitate remote access.<BR /><BR />The RIB can be configured to send SNMP Traps to HPSIM, you could try disconnecting the Auxiliary power and seeing if a Trap is generated. This may also be reflected in HPSIM, it could be either the Shost server or the RIB. Thu, 21 Oct 2004 14:23:01 GMT https://community.hpe.com/t5/server-management-systems/riblo-data-through-sim/m-p/3405234#M6806 Rob Buxton 2004-10-21T14:23:01Z