https://community.hpe.com/t5/server-management-systems/vca-not-enough-storage/m-p/3406709#M6828 This is typically caused by the lack of an SNMP read/write community string on the system. Mon, 25 Oct 2004 09:50:14 GMT David Claypool 2004-10-25T09:50:14Z https://community.hpe.com/t5/server-management-systems/vca-not-enough-storage/m-p/3406708#M6827 Hi All,<BR /><BR />i have a problem with the VCA. When i swicht on the VCA, it reports:<BR /><BR />"The Version Control Agent encountered an error while obtaining the software and firmware inventory."<BR /><BR />and<BR /><BR />"Not enough storage is available to process this command."<BR /><BR /><BR />This happens on Servers, that have enough storage and Memoryspace. No SQL-Services are running. A reinstall of the agent has take no afect.<BR /><BR />Can any Body Help me? See the Attachment for Info.<BR /><BR />Thanks an Greetings Tom:-)<BR /><BR /> Mon, 25 Oct 2004 01:12:49 GMT https://community.hpe.com/t5/server-management-systems/vca-not-enough-storage/m-p/3406708#M6827 tom stinauer 2004-10-25T01:12:49Z https://community.hpe.com/t5/server-management-systems/vca-not-enough-storage/m-p/3406709#M6828 This is typically caused by the lack of an SNMP read/write community string on the system. Mon, 25 Oct 2004 09:50:14 GMT https://community.hpe.com/t5/server-management-systems/vca-not-enough-storage/m-p/3406709#M6828 David Claypool 2004-10-25T09:50:14Z https://community.hpe.com/t5/server-management-systems/vca-not-enough-storage/m-p/3406710#M6829 I had the same issue once I set snmp on the servers to only allow specific ip's to access them. Once I put 127.0.0.1 in the list, that went away.<BR /><BR />Chris Mon, 01 Nov 2004 15:13:05 GMT https://community.hpe.com/t5/server-management-systems/vca-not-enough-storage/m-p/3406710#M6829 Chris Hammond_6 2004-11-01T15:13:05Z