https://community.hpe.com/t5/server-management-systems/setting-up-snmp/m-p/3413009#M7036 It's probably simpler to set it up from the Windows Services Screen.<BR />You need a suitable Read Only and Read Write Community name.<BR />Initially you might want to Allow All Hosts access.<BR />You need to set the Trap destination back to the HPSIM Server.<BR />You need to set up HPSIM under Options / Protocol Settings / Global Settings and add the community names there.<BR />Remember Community names are case sensitive. Tue, 02 Nov 2004 17:03:53 GMT Rob Buxton 2004-11-02T17:03:53Z https://community.hpe.com/t5/server-management-systems/setting-up-snmp/m-p/3413008#M7035 How do you set up an SNMP community within HP SIM (for Windows). Can you just configure the SNMP service, add a trap destination, configure a community and configure information to forward and it works fine (HP SIM user guide) ??<BR /><BR />Is there other documentation ??<BR /><BR />Thanks !!! Tue, 02 Nov 2004 10:39:56 GMT https://community.hpe.com/t5/server-management-systems/setting-up-snmp/m-p/3413008#M7035 Robert Durenkamp 2004-11-02T10:39:56Z https://community.hpe.com/t5/server-management-systems/setting-up-snmp/m-p/3413009#M7036 It's probably simpler to set it up from the Windows Services Screen.<BR />You need a suitable Read Only and Read Write Community name.<BR />Initially you might want to Allow All Hosts access.<BR />You need to set the Trap destination back to the HPSIM Server.<BR />You need to set up HPSIM under Options / Protocol Settings / Global Settings and add the community names there.<BR />Remember Community names are case sensitive. Tue, 02 Nov 2004 17:03:53 GMT https://community.hpe.com/t5/server-management-systems/setting-up-snmp/m-p/3413009#M7036 Rob Buxton 2004-11-02T17:03:53Z