https://community.hpe.com/t5/server-management-systems/hp-sim-4-1-not-receiving-snmp-traps-from-stk-library/m-p/3436343#M7890 I'm running HP SIM 4.1 and HP NNM 7.1 on the same server. They both appear to be working OK. I recently configured a StorageTek L180 library to forward traps to my management server. I specified the read-only community string, IP address and SNMP listening port on the management server. I downloaded the MIB for the library from the vendor and successfully compiled and registered the MIB. I updated the severity for all of the different traps within the HP SIM GUI (SNMP Trap Setting). I also set up an task in Automatic Event Handling to log any events coming from the library and to e-mail them to myself. So I think I covered all the bases on the HP SIM side, but every time I generate an event on the library, NNM sees the event but not SIM. Did I miss something? Fri, 03 Dec 2004 15:33:12 GMT James Yocum 2004-12-03T15:33:12Z https://community.hpe.com/t5/server-management-systems/hp-sim-4-1-not-receiving-snmp-traps-from-stk-library/m-p/3436343#M7890 I'm running HP SIM 4.1 and HP NNM 7.1 on the same server. They both appear to be working OK. I recently configured a StorageTek L180 library to forward traps to my management server. I specified the read-only community string, IP address and SNMP listening port on the management server. I downloaded the MIB for the library from the vendor and successfully compiled and registered the MIB. I updated the severity for all of the different traps within the HP SIM GUI (SNMP Trap Setting). I also set up an task in Automatic Event Handling to log any events coming from the library and to e-mail them to myself. So I think I covered all the bases on the HP SIM side, but every time I generate an event on the library, NNM sees the event but not SIM. Did I miss something? Fri, 03 Dec 2004 15:33:12 GMT https://community.hpe.com/t5/server-management-systems/hp-sim-4-1-not-receiving-snmp-traps-from-stk-library/m-p/3436343#M7890 James Yocum 2004-12-03T15:33:12Z https://community.hpe.com/t5/server-management-systems/hp-sim-4-1-not-receiving-snmp-traps-from-stk-library/m-p/3436344#M7891 I don't think NNM and SIM can be run on the same server because they would both try to listen on port 162 for incoming traps. <BR /><BR />I suggest you go to <A href="http://www.sysinternals.com/ntw2k/source/tcpview.shtml" target="_blank">http://www.sysinternals.com/ntw2k/source/tcpview.shtml</A> and download the free tcpview utility. Fri, 03 Dec 2004 17:33:01 GMT https://community.hpe.com/t5/server-management-systems/hp-sim-4-1-not-receiving-snmp-traps-from-stk-library/m-p/3436344#M7891 Joel Rubenstein 2004-12-03T17:33:01Z